Looking for Cable - Does it exist?

[Magnet]

Having trouble squeezing my ROMED8U in my iStarUSA HB3100 case. The SAS ports on the board are where a case fan is. I'm going to have to modify the fan housing or find a cable that is right angle in the way I need it.

I want something like this. Mini SAS 8643 to 4x SATA, BUT I need the 90 the other way. I need the wire to come from the clip side. I have a case limitation and its either find this cable or bust out the dremel :/

Thanks for any tips!

 

[oneplane]

Dremel it

 

[DavidWJohnston]

Not sure that connector exists, these appear to be the potential types:



Maybe try one of those side exit, or get the straight one and cut away at the plastic and strain relief until you can bend the wires at a sharp angle the way you need.

 

[Magnet]

Side exits would work. Ultimately, the 80MM fan that was in the way was screwed in and not riveted, so I was able to reverse the mount and orient the fan on the far side to allow my standard cables to fit. I will look into the side exits so thanks for posting @DavidWJohnston