lga3647 esxi build *Nov 2024 --> Began Switching from vSphere to Proxmox

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
photos showing the MikroTik CRS418 router, tplink EAP720 access point , and also my new QINIYEK RJ45 transceiver ($27 USD on amazon!). Connects the CSR418 SFP+ to a TRENDnet s750 10Gb RJ45 switch. And it keeps it all pretty cool with fans running between 2550 and 2820 RPM (I can't hear it) while keeping internal temps about 55c-57c.

I'm considering replacing that trendnet s750 switch (it's not a smart switch) with a MikroTik CRS510 and upgrading to SFP28 NICS in my servers). That will be overkill for me but still considering it.
 

Attachments

  • DSC02130.jpg
    DSC02130.jpg
    102.5 KB · Views: 3
  • DSC02131.jpg
    DSC02131.jpg
    88.4 KB · Views: 3
  • DSC02132.jpg
    DSC02132.jpg
    67.4 KB · Views: 3
Last edited:
  • Like
Reactions: itronin
Doing network health checks and testing between my proxmox servers and also the new wifi Access points within my LAN:

Tx Rx between proxmox servers (one supermicro X11DPI-NT and two supermicro 5028D-TN4T) is via the TRENDnet s750 10Gb ethernet cat6 switch (not a layer 2 switch). Looks good at 9.42Gbps!
1793712717185.png

The wifi Tp-link EAP720 access point has a 2.5Gb PoE and that is connected to Grandstream GWN7721P switch.

The Grandstream switch is connected to CRS418 router via SFP+ DAC

The TRENDnet s750 (which my prox servers interconnect) is connected to CRS418 router via CAT6 and QINIYEK RJ45 transceiver to CRS418 SFP+ #2.

Tx Rx speed test to and from my laptop and my proxmox servers via the TPLink AP 5Ghz on 160Mhz DFS channel is 1,370 Mbps. real world scp push/pull of MATRIX moviesto and from my Plexserver is close to 150MBps. Pretty good on wifi I think!
1793713784065.png
I do not condone pirated movies, this was only a test. Also those movies were terrible.
 
Last edited:
  • Like
Reactions: Marsh and itronin