I followed the wiki exactly, and every time I try to test the new install I get the following:
smbclient -L localhost -U%
Connection to localhost failed (Error NT_STATUS_CONNECTION_REFUSED)
I've confirmed that samba is running, and have confirmed that there are no iptables rules blocking any ports.
My samba config is as follows:
# Global parameters
[global]
workgroup = INTERNAL
realm = INTERNAL.GENERIC.COM
netbios name = BUS-NY-SAMBA-01
server role = active directory domain controller
dns forwarder = 8.8.8.8
interfaces = eth0 lo
bind interfaces only = yes
[netlogon]
path = /var/lib/samba/sysvol/internal.generic.com/scripts
read only = No
[sysvol]
path = /var/lib/samba/sysvol
read only = No
DNS as follows:
127.0.0.1 localhost.localdomain localhost
192.168.1.225 BUS-NY-SAMBA-01.internal.generic.com BUS-NY-SAMBA-01
# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
After a reboot I get the following:
BUS-NY-SAMBA-01:~$ smbclient -L localhost -U% session setup failed: NT_STATUS_OBJECT_NAME_NOT_FOUND
smbclient -L localhost -U%
Connection to localhost failed (Error NT_STATUS_CONNECTION_REFUSED)
I've confirmed that samba is running, and have confirmed that there are no iptables rules blocking any ports.
My samba config is as follows:
# Global parameters
[global]
workgroup = INTERNAL
realm = INTERNAL.GENERIC.COM
netbios name = BUS-NY-SAMBA-01
server role = active directory domain controller
dns forwarder = 8.8.8.8
interfaces = eth0 lo
bind interfaces only = yes
[netlogon]
path = /var/lib/samba/sysvol/internal.generic.com/scripts
read only = No
[sysvol]
path = /var/lib/samba/sysvol
read only = No
DNS as follows:
127.0.0.1 localhost.localdomain localhost
192.168.1.225 BUS-NY-SAMBA-01.internal.generic.com BUS-NY-SAMBA-01
# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
After a reboot I get the following:
BUS-NY-SAMBA-01:~$ smbclient -L localhost -U% session setup failed: NT_STATUS_OBJECT_NAME_NOT_FOUND