Hello!
A few months ago I picked up a used HP H240 controller. It's running the current 7.0 firmware in non-raid mode.
lately I've noticed these errors in the master console of my debian VM I have it passed thru to:
I saw them a LOT with a SAS3 SSD (a Netapp X371 / Samsung PM1635a), but also see them on a HGST SAS3 spinner HDD.
I tried two different SAS breakout cables and both had the errors.
the other card I have is an old LSI 9260-4i, which is hardware RAID and SAS2, so it's a different beastie. But I don't get the linux console errors with it.
I can just replace whatever is broken but i'm not positive where to start. I've got a weird SSD paired with a weird card with weird cabling.
And if it is the controller I wonder if anyone else has seen these problems with H240s?
A few months ago I picked up a used HP H240 controller. It's running the current 7.0 firmware in non-raid mode.
lately I've noticed these errors in the master console of my debian VM I have it passed thru to:
Code:
blk_update_request: I/O error, dev sdb, sector 5560583976 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0
[ 2033.450551] sd 3:0:1:0: [sdb] tag#134 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=2s
[ 2033.450569] sd 3:0:1:0: [sdb] tag#134 Sense Key : Aborted Command [current] [descriptor]
[ 2033.450573] sd 3:0:1:0: [sdb] tag#134 Add. Sense: Information unit iuCRC error detected
[ 2033.450576] sd 3:0:1:0: [sdb] tag#134 CDB: Read(16) 88 00 00 00 00 01 4b 6f c7 28 00 00 00 80 00 00
I tried two different SAS breakout cables and both had the errors.
the other card I have is an old LSI 9260-4i, which is hardware RAID and SAS2, so it's a different beastie. But I don't get the linux console errors with it.
I can just replace whatever is broken but i'm not positive where to start. I've got a weird SSD paired with a weird card with weird cabling.
And if it is the controller I wonder if anyone else has seen these problems with H240s?
Last edited: