Intel Xeon D-1500 Series Discussion

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

lucidrenegade

Member
Dec 12, 2011
75
20
8
Thanks for the insight @Patrick, it's much appreciated.

I looked at that board but only 2 of the 6 SATA ports are 6Gbps. If I'm making an all SSD storage server I don't want my storage interfaces being the bottleneck. I do think the Avaton is a great option for my needs I just can't seem to find one with the storage interfaces I want while also allowing me the ability to upgrade to 10GbE.
It has Marvell SAS controllers, but how about this? P9A-I/C2750/SAS/4L - Specifications

C2750 with a total of 18 ports (2 sata or 1 sata/1 M.2, 16 SAS), plus a PCI-E 2.0 x4 slot for 10Gb. Each of the 2 SAS chips are connected to the SOC via PCI-E 2.0 x4 lanes, which is roughly 2GB of bandwidth per 8 drives.
 

JimPhreak

Active Member
Oct 10, 2013
553
55
28
It has Marvell SAS controllers, but how about this? P9A-I/C2750/SAS/4L - Specifications

C2750 with a total of 18 ports (2 sata or 1 sata/1 M.2, 16 SAS), plus a PCI-E 2.0 x4 slot for 10Gb.
That board appears to have just about everything I'd want and I did look at it but in digging deeper I found a ton of user reviews claiming the storage controller doesn't work with any Linux based storage OS and that's a huge issue. Basically people claim ASUS completely dropped the ball on what could/should have been a fantastic storage board.
 

smokey7722

Member
Oct 20, 2015
109
23
18
That board appears to have just about everything I'd want and I did look at it but in digging deeper I found a ton of user reviews claiming the storage controller doesn't work with any Linux based storage OS and that's a huge issue. Basically people claim ASUS completely dropped the ball on what could/should have been a fantastic storage board.
I had looked at some of the C2750 boards for my new file server build as well but had to give up and wait for the Xeon-D's as I need to be able to support a lot more than 32GB of ram as I plan on using ZFS. I didn't even look at support for the drive controllers based on that limitation.
 

Deslok

Well-Known Member
Jul 15, 2015
1,122
125
63
34
deslok.dyndns.org
I had looked at some of the C2750 boards for my new file server build as well but had to give up and wait for the Xeon-D's as I need to be able to support a lot more than 32GB of ram as I plan on using ZFS. I didn't even look at support for the drive controllers based on that limitation.
The C2750 is capable of 64gb of ram as is the C2550, granted Xeon-D moving this to 128gb makes me look forward to replacing old E54xx servers with them to get some more powerful hyper-v nodes(at least in my use case)
 

smokey7722

Member
Oct 20, 2015
109
23
18
The C2750 is capable of 64gb of ram as is the C2550, granted Xeon-D moving this to 128gb makes me look forward to replacing old E54xx servers with them to get some more powerful hyper-v nodes(at least in my use case)
For both the file server and ESX builds I needed the benefit of the 128GB capacity. When I started searching the Xeon-D's were just coming out and so I quickly skipped over the C2750/2550's for the Xeon-D's. I'm finishing the planning phase now and working on finances but should be building soon.
 

JimPhreak

Active Member
Oct 10, 2013
553
55
28
The C2750 is capable of 64gb of ram as is the C2550, granted Xeon-D moving this to 128gb makes me look forward to replacing old E54xx servers with them to get some more powerful hyper-v nodes(at least in my use case)
This is correct. The ASRock Avoton boards all supports 64GB from what I understand. It's just the boards with only 2 DIMM slots that appear limited to 32GB.
 

Patrick

Administrator
Staff member
Dec 21, 2010
12,511
5,792
113
There is a practical limit on Avoton since the number of 16GB DDR3L ECC UDIMMs/ SODIMMs out there is very small. I basically equate 8GB/ slot as the limit of an Avoton platform.
 

PigLover

Moderator
Jan 26, 2011
3,184
1,545
113
@JimPhreak - I don't think Patrick was suggesting Avoton boards with 4 dimm slots are hard to find (they are not). He was suggesting that 16GB DDR3L ECC UDIMMs or SODIMMs are so scarce/expensive that they might as well be considered mythical beasts.

For all practical purposes, Avoton is limited to 32GB. Not because of its own limitations - but because the means to deploy 64GB isn't readily available.
 
  • Like
Reactions: Patrick

JimPhreak

Active Member
Oct 10, 2013
553
55
28
@JimPhreak - I don't think Patrick was suggesting Avoton boards with 4 dimm slots are hard to find (they are not). He was suggesting that 16GB DDR3L ECC UDIMMs or SODIMMs are so scarce/expensive that they might as well be considered mythical beasts.

For all practical purposes, Avoton is limited to 32GB. Not because of its own limitations - but because the means to deploy 64GB isn't readily available.
Point well taken @PigLover.
 

AmshTemp

New Member
May 28, 2015
18
0
1
44
Wave -1 had a limitation in that only one of the two USB controllers is being used.
Do you happen to know if they changed that with wave-2?
 

Evan

Well-Known Member
Jan 6, 2016
3,346
598
113
Has anybody seen either of these boards for sale yet ?

X10SDV-4C-TLN2F with D-1521 (the wave 2 update cpu)
X10SDV-4C-TLN4F with D-1518

I figure they are the 2 lowest power Xeon-D options right ? And reasonably priced.
Normally I would say SM would be lower power than Gigabyte and ASRock from what I understand of past products, anybody think their new boards will be better than SM ?
 

hjfr

Member
Nov 21, 2013
79
20
8
France
I'm trying to buy a Supermicro Xeon-D board in Europe.
I find the site "lambdatek" (anybody know it ?) who list a lot of Supermicro references. But on this site, sometimes, a board appears two times at different price. Example for the X10SDV-8C-TLN4F: "X10SDV-8C-TLN4F-SINGLE" (more expansive) and "X10SDV-8C-TLN4F-O". What's the difference ?
Thks
 

Davewolfs

Active Member
Aug 6, 2015
339
32
28
So is everyone who got their 2670 going to replace them now with a more power efficient Xeon D-1587?