Intel S2600CP Motherboard - tuning

[alexxxxss]

How can I:
- deactivate hyper-threading (in bios I did not find)
- undervolting CPU
- use low voltage memory

 

[evolucian911]

How can I:
- deactivate hyper-threading (in bios I did not find)
- undervolting CPU
- use low voltage memory

Maybe you have a very very old vlbios version because I have been able to disable ht on old bios with PCIe 3 enabled on V1 CPU up to the latest.

You may not be able to undervolt but try TrottleStop if it supports that cpu

Low voltage ram should be supported off the bat. Or check jumper settings.

Sent from my LG-LS997 using Tapatalk

 

[alexxxxss]

Maybe you have a very very old vlbios version because I have been able to disable ht on old bios with PCIe 3 enabled on V1 CPU up to the latest.

Thank you! My mistake

You may not be able to undervolt but try TrottleStop if it supports that cpu

I will check

 

[alexxxxss]

Hi all!
Сan I use different processors on the motherboard?
Or two processors should be completely identical?

 

[alexxxxss]

found the answer

 

[alexxxxss]

Hi all!
Intel S2600CP Motherboard + 2x Xeon E5-2640.
Windows 10.
BIOS SE5C600.86B.02.06.0006
I use "force-enable-gen3.exe".
Videocard 750TI start as PCI3.0, but 1030 and 2060Super still work as PCI 2.0.
also now i get error "PCI Vendor and Device IDs do not match!"
How to start 2060Super as PCI 3.0?