Innodisk SATA DOM on a SuperMicro X9 motherboard

[macrules34]

I was wondering if there is a cable that will connect to the Innodisk SATA DOM power to the supermicro X9 motherboard?

Innodisk SATA DOM info:
SATADOM-ML 3ME3 V2
P/N: DESML-B56D08BCAQCA-B073
Size: 256GB

Supermicro X9 Motherboard:
Model: X9DBS-F-2U
3 pin power socket, pin 1 5v+, pin 2 ground and pin 3 ground

 

[Sean Ho]

perhaps CBL-PWEX-0625?

 

[macrules34]

Ya I saw those, but I think the SATA DOM has a 3 pin connector but only two pins get used.

 

[macrules34]

Here is a pic of the SATA DOM power connector.

 

[BlueFox]

This looks to be 3 pin, though you would need to splice it with another cable since I don't think you have 4 pin Molex available in your chassis: Delock Products 54063 Delock Power cable for Delock SATA DOM Module or 3-pin connector 2-wire Power cables For SATADOM SATADOM-SL 3SE SATA SSD | eBay

 

[macrules34]

So basically your saying buy a part that has the SATA DOM power connector and buy one with the motherboard power connecter, cut off the end that won't fit and combine the two together?

 

[BlueFox]

That certainly is an option, though not the most elegant.

 

[macrules34]

Just curious, what were you thinking?

 

[BlueFox]

Essentially what you had suggested. Looked a bit to see if I could find the right cable and only found ones with 4 pin Molex ends.

 

[macrules34]

I ordered the 2nd ones that you have the eBay link and the cable CBL-PWEX-0625 for the motherboard end.

 

[Glock24]

I installed a 64GB one in a X9 E3 board some time ago, I had to splice the cables and make the right connections, I'll take a picture as soon as I get a chance.