IBM Serveraid M5110: unable to boot

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

labo

New Member
Jan 21, 2015
10
0
1
51
Hi All,
I bought an IBM Serveraid M5110 card with 512MB flash and having problems in even booting with the card.
The system(Asus Z87 pci-e 3.0) hangs at boot before even getting into BIOS. Any help greatly appreciated.
Also I would like to cross flash this to LSI if possible, I see few threads but not sure if anyone is successful in cross flashing.
Thanks,
 
Last edited:

labo

New Member
Jan 21, 2015
10
0
1
51
Thanks to fca for the pin 5/6 mod. The card now boots. Looking for cross flash success posts....
 

RickSweden

New Member
Mar 17, 2015
4
0
1
57
What is the pin 5/6 mod, can you please share the specific details or a link where this is described?
I have the same symptom trying to boot from an Asus P6T Deluxe with a IBM Serveraid M5110 card attached.
It won't even go to post...
Also, did you find and flash an LSI FW on this card?
 

CJ145

Member
Mar 11, 2015
50
19
8
You cover pins 5 and 6 with electrical tape to prevent their connection. These are the SMB data and clock pins.