IBM M5015 experiences

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

xayide

New Member
May 15, 2017
17
3
3
53
Is it possible to get Cache 2.0 and all features on an M5015 without using any extra hardware, ie some kind of software patch?
 

fabio1983

New Member
Sep 12, 2017
2
0
1
40
Hello, i would like to flash LSI 9261-i8 to Dell H700.

Unfortunately, I have flashed the SPD not the SBR!!!!

Now the Controller said:

RAID ADAPTER
unrecoverable Error
Please check the SDRAM connection
If problems persist contact Tech Support
Press any key to continue....

Can someone send me the SPD file from a LSI 9261-i8 controller to flashed it again?

Thank you!
 

andrew-z

New Member
Feb 13, 2021
1
0
1
Dear All,

I have 3 M5015 controllers. I flashed them to 9260-8i firmware.

I did the following:
1) megarec -cleanflash 0
2) megarec -writesbr 0 sbrempty.bin
3) reboot
4) megarec -m0flash 0 0102_lsi.rom (I tried other versions)
5) megarec -writesbr 0 sbr9260.bin
6) reboot

The first two controller flashed normally and I was able to use RAID6 without hardware key. The last controller does not allow to use RAID6 without key like IBM M5015.

Why is this happening and what am I doing wrong?