Hello, is it possible to set up the NIC with 2,5 or 5 GBit mixed mode?
The NIC HP FlexFabric 10Gb 2-port 533FLR-T does only offer 1 or 10 GBit speed, no 2,5 or 5 GBit inbetween in Windows 10. TrueNAS only shows a 1 GBit connection as of yet since I do not have another 10 GBit card.
HPE drivers and firmware update have been applied:
-----------------------------------------------------------------------------
Online Firmware Update Tool for Windows (5.2.3.0)
Copyright (c) 2011-2019 Hewlett-Packard Enterprise Development LP
-----------------------------------------------------------------------------
Upgrade library: LibQLGC_HpFwUpg.dll (ver 8.15.0.0)
Found 1 adapters
Examining NIC HP FlexFabric 10Gb 2-port 533FLR-T Adapter at Ethernet 6
Update firmware MBI from version 7.10.33 to 7.18.80? [y]es/[n]o/[q]uit/[c]ontinue (y) y
Flash file name: C:\...FW\hp_mbi_7.18.80.bin
Updating HP FlexFabric 10Gb 2-port 533FLR-T Adapter...please wait.
takes longer than 10 minutes, be patient
upon PC boot "CTRL+S" will enter the NIC setup
The NIC HP FlexFabric 10Gb 2-port 533FLR-T does only offer 1 or 10 GBit speed, no 2,5 or 5 GBit inbetween in Windows 10. TrueNAS only shows a 1 GBit connection as of yet since I do not have another 10 GBit card.
HPE drivers and firmware update have been applied:
-----------------------------------------------------------------------------
Online Firmware Update Tool for Windows (5.2.3.0)
Copyright (c) 2011-2019 Hewlett-Packard Enterprise Development LP
-----------------------------------------------------------------------------
Upgrade library: LibQLGC_HpFwUpg.dll (ver 8.15.0.0)
Found 1 adapters
Examining NIC HP FlexFabric 10Gb 2-port 533FLR-T Adapter at Ethernet 6
Update firmware MBI from version 7.10.33 to 7.18.80? [y]es/[n]o/[q]uit/[c]ontinue (y) y
Flash file name: C:\...FW\hp_mbi_7.18.80.bin
Updating HP FlexFabric 10Gb 2-port 533FLR-T Adapter...please wait.
takes longer than 10 minutes, be patient
upon PC boot "CTRL+S" will enter the NIC setup
Last edited: