How to install Debian on a Zsbox G30M-N100 ?

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

olivier2831

New Member
Jan 23, 2025
5
0
1
Hello,
I'd like to install Debian on a Topton G30M-N100 on which OPNSense is currently installed.

I was thinking of :
- accessing the BIOS through access keys,
- ask to machine to boot over an external USB key on which Debian Installer is copied
- run the installer.

The issue I'm hitting is I can't find BIOS access keys (nothing is displayed on screen during boot).
How should I proceed ?

Cheers
 
Thank you very much for replying.

I've followed this procedure:

- reboot PC using Ctrl-Alt-Del key combination
- wait for reboot messages to disappear from screen
- hold-on for 5 seconds
- hit 5 times, with 1 sec delay between each strike, a key combination on my keyboard
- hold-on for 5 seconds
- hear 3 short consecutive beeps from the machine
- wait 75 seconds for booting messages to appear (before that, screen remains black)
- observe 15 seconds or so, of booting messages on screen
- observe login invite (from Opnsense) showin machine is ready

I've tried the above from any key from F1 to F2, Esc, Del, Ctrl+Q, Ctrl+S
I always had the same result: black screen without any self test or booting message until 90s or so from the start.

1. Is typing in the middle between boot start and 3 beeps sound the right thing to do ?
2. What should happen if I take the disk off ? Is it the silver bullet to discover BIOS access keys ?
3. Suggestions ?
 
If I remove current NVMe disk from this unit, does it help to discover required key strokes to access BIOS ?
 
I edited this thread tittle as though this box was bought on Aliexpress as manufactured by Topton, its seems to be manufactured by Zsbox.