Horaco 2.5GbE Managed Switch (8 x 2.5GbE + 1 10Gb SFP+)

[Adam86]

Don't suppose anyone has got a newer firmware for the KP-9000-9XHPML-X POE Switches at all?

I'm on:

Firmware Version	V100.9.4
Firmware Date	Aug 07 2024
Hardware Version	V1.1

 

[PezauM]

I've devoted some time today, to make a movie about the switch losing it's configuration after power cut.
As asked by XikeStor number 1 store on AliExpress.

But as luck would have it, I tried at least 6 times and the switch came back with it's settings intact every time.

So, I'm not sure if I should be happy, that it's now working as it should. Since I don't know if or when it will happen again.

Wow, I'm having the same problem. When I turn it off, the settings reset. It happens after updating from firmware 1.90 to 1.91. I've tried firmware 1.3, 1.7, 1.9, and 1.91, without success. Any tips? What firmware are you using? This is a Horaco ZX-SWTGW218AS.

 

[komodin]

They kindly sent me upgrade firmware that I was able to recover (and upgrade!) the unit with.
This is for Horaco HC-SWTGW218AS.
This is ONLY for units with 200.x firmware.
This is specifically noted as NOT for units with 2.x firmware.

I will also note that the uboot password is not 'Switch321' on my unit.

Thanks for sharing!

Mine says:

Device Model	HC-SWTGW218AS
Firmware Version	V1.9.1
Firmware Date	May 10 2024
Hardware Version	V1.1

Do you know if the firmware you shared is compatible?

Thanks!

 

[JMBarri]

They kindly sent me upgrade firmware that I was able to recover (and upgrade!) the unit with.
This is for Horaco HC-SWTGW218AS.
This is ONLY for units with 200.x firmware.
This is specifically noted as NOT for units with 2.x firmware.

I will also note that the uboot password is not 'Switch321' on my unit.

I just updated using your file, everything is perfect, thank you very much, best regards.

 

[lgvo]

I got the HORACO (HC-SWTGW218AS - v200.x firmware) and I'm having issues with the vLAN settings, management interface is always available on any vLAN, the traffic between vLANs looks to work, but can't isolate the management interface from any of them. Is it the same for all of you with managed versions? From some messages I guess it works properly for the v1.9.x .

EDIT: After some back and forward discussion with their support hey mentioned that it's actually by design, that they changed it to be available on all ports after market research (what?). That may explain why I see some post that mentioned that you could isolated the web management to a specific port. I'm requesting a refund to send it back. The worst is that I had already bought a 4 + 2 one and some modules that should arrive in 2-3 weeks.

 

[SlowmoDK]

I got the HORACO (HC-SWTGW218AS - v200.x firmware) and I'm having issues with the vLAN settings, management interface is always available on any vLAN, the traffic between vLANs looks to work, but can't isolate the management interface from any of them. Is it the same for all of you with managed versions? From some messages I guess it works properly for the v1.9.x .

EDIT: After some back and forward discussion with their support hey mentioned that it's actually by design, that they changed it to be available on all ports after market research (what?). That may explain why I see some post that mentioned that you could isolated the web management to a specific port. I'm requesting a refund to send it back. The worst is that I had already bought a 4 + 2 one and some modules that should arrive in 2-3 weeks.

If you have ingress so far into your network that this could be a problem, then the switch config is probably your least concern, just saying

You can also change to a more secure password than admin:admin

 

[stemar]

Hi Everyone,
I've got firmware V200.1.16 from vendor for switch Lianguo LG-SG5T1(WEB) 5*2.5GbE + 1*10GbE SFP+, maybe it will be useful for someone.

By visual it is probably same as Horaco HC-SWTGW215AS

 

[pabloalcantara]

Does anyone have a dump of a SWTGW215AS? I have multiple units that have all failed over the duration of a year now, I'd like to try reflash them / swap out the flash mem and see if that resolves the issue. I saw up-n-atom has some dumps but not for that model.

Here is the versions I have for the HR-SWTGW215AS