HGST Ultrastar He10 - 10TB @ $129.95

UhClem

Active Member
Jun 26, 2012
258
120
43
NH, USA
@unmesh ,
[sour_grapes]
Even if you could find/accomodate a SAS HBA, your TS140 layout would (likely) not permit cabling to SAS drives in the 2 (std.) 3.5 bays [side-mounted, and case side panel would not clear the (necessary) drive-end SAS connector]. The 2 [opt.] 5.25 bay locations would be OK.
[/sour_grapes]
=========
"When does a bargain stop being a bargain?"
 

Sleyk

Well-Known Member
Mar 25, 2016
1,322
665
113
Stamford, CT
These are a great deal. I would pick some up, but Im still running of 8 x 8TB WD Helium in RAIDZ2.

What's most amazing is that these drives are still very much available! 1448 sold and still 3557 left :.)
 

Sleyk

Well-Known Member
Mar 25, 2016
1,322
665
113
Stamford, CT
Unfortunately, the 1x slot connector is a closed one.

I'm not using all the NIC ports so getting a 1x dual-port NIC is a possibility though those seem to be hard to find.

What HBA would I be looking for? From the casual reading that I've done, people seem to be reflashing cards.

Or I could just buy WD SATA Reds and call it a day :)
Hey brother, what you need is a Marvell 9215 PCI-E 2.0 x 1 card. See this one here: Marvell 9215

or you can get this ASMEDIA 1064 chipset. Both x1 cards work perfectly. See here: ASMEDIA CARD

I have been using these cards for years with zero problems. Full bandwidth PCI-E 2.0 x 1 (500MB/s)

If you have 4 drives, SATA III speed, 500MB/s divided by 4 drives = 125MB/s per drive. Which is basically what these drives transfer at after burst speed.
 
  • Like
Reactions: TechGambino

FlorianZ

Active Member
Dec 10, 2019
100
99
28
Hey brother, what you need is a Marvell 9215 PCI-E 2.0 x 1 card. See this one here: Marvell 9215

or you can get this ASMEDIA 1064 chipset. Both x1 cards work perfectly. See here: ASMEDIA CARD
Correct me if I am wrong, but these are SATA controllers. If they wanted to hook up the drives referred to in this thread, they'd need a SAS controller, though.
 
  • Like
Reactions: Sleyk

Sleyk

Well-Known Member
Mar 25, 2016
1,322
665
113
Stamford, CT
Correct me if I am wrong, but these are SATA controllers. If they wanted to hook up the drives referred to in this thread, they'd need a SAS controller, though.
Ah, yeah thats true. My bad. The only other way would be to cut the H1110 to make it fit in a closed x1, which is doable and would work, but you take away the x4 bandwidth forever on that card.
 

DRW

New Member
May 1, 2021
19
6
3
  • Like
Reactions: ArthurA

llowrey

Active Member
Feb 26, 2018
143
114
43
Good catch, that seems to be the trade-off here.
These are also 512e but can be formatted to 4kn (iirc). I seem to recall having done that w/o issues. Not sure if that qualifies as a trade-off.
 
Last edited:
  • Like
Reactions: ArthurA

Madhelp

Member
Feb 7, 2013
30
6
8
I reached out the seller a month and a half ago to buy 50 plus drives and he said $119.95 was the lowest they would go regardless of quantity.

I ended up ordering 86 at that price and returning two that gave me issues. So far so good tho.
 

NNate

New Member
Feb 19, 2021
4
2
3
I purchased from this seller and just received my drives. The listing stated 22k hours and manufactured in 2018. The drives I received had 32k hours and manufactured in 2016 (HUH721010AL4200 HGST Ultrastar He10 10TB 7200RPM SAS 12Gbps 256MB 993257125537 | eBay).

Not sure what the mix-up is. This is my first time getting into enterprise SAS drives. Worth complaining about? They accepted my offer of $119/per drive - did that just earn me the bottom of the barrel?
 
Last edited:

Fritz

Well-Known Member
Apr 6, 2015
2,770
829
113
68
I purchased from this seller and just received my drives. The listing stated 22k hours and manufactured in 2018. The drives I received had 32k hours and manufactured in 2016 (HUH721010AL4200 HGST Ultrastar He10 10TB 7200RPM SAS 12Gbps 256MB 993257125537 | eBay).

Not sure what the mix-up is. This is my first time getting into enterprise SAS drives. Worth complaining about? They accepted my offer of $119/per drive - did that just earn me the bottom of the barrel?
I think the current batch came from a high usage environment. This would explain the low price. Think I'll wait awhile before picking up any more
 

PrimeXFN

New Member
Mar 4, 2019
13
8
3
The 10-pack I purchased from this same seller came in last Friday (overnight shipping) - 2017 DOM and 27K hours.
I've ordered 8 more.

If your listing said 2018 DOM and ~22K POH, I would absolutely contact them. I personally would still use them and not bother with a return, but a price adjustment is absolutely warranted as the drives were quite demonstrably not as described.
 

custom90gt

Member
Nov 17, 2016
80
29
18
37
Ugh, mine are also from 2016 with the same amount of power on hours. I'm still happy with the drives, but if I could get any type of partial refund it would be nice.