Anyone have a solution to this, not sure if the dell dac is the problem. Have read that the Aruba S2500 wasn't picky about dacs.
Connect x2 is in Ethernet mode, no lights, Network settings show no cables plugged in.
Output of query:
:\Users\Administrator>flint -d mt26418_pci_cr0 query
Failed to identify the device - Can not create SignatureManager!
Image type: FS2
FW Version: 2.9.1000
Device ID: 26418
Description: Node Port1 Port2 Sys image
GUIDs: 0002c90300283dd2 5849560e629c0d01 5849560e629c0d02 0002c90300283dd5
MACs: 0002c9283dd2 0002c9283dd3
VSD:
PSID: MT_0F90120008
Querying Mellanox devices firmware ...
Failed to identify the device - Can not create SignatureManager!
Failed to identify the device - Can not create SignatureManager!
MLXUPD:
Device #1:
----------
Device Type: ConnectX2
Part Number: MHRH2A_A2
Description: ConnectX-2 VPI adapter card;dual-port QSFP;IB 20Gb/s & 10GigE;PCIe2.0x8 5.0GT/s;NCSI Enabled;RoHS R6
PSID: MT_0F90120008
PCI Device Name: mt26418_pci_cr0
Versions: Current Available
FW 2.9.1000 N/A
Output of putty connected to Aruba:
Port VendorName VendorSN ArubaSupported CableType
---- ---------- -------- -------------- ---------
GE0/1/0 Amphenol CN053HVN85S2ECA NO 10GBASE-DAC-P
Does appear to be getting a IP from switch, but outside of local network range...
Driver Version : 5.50.14740.0
Firmware Version : 2.9.1000
Port Number : 1
Bus Type : PCI-E 5.0 Gbps x8
Link Speed : ----
Part Number : MHRH2A-XSR
Device Id : 26418
Revision Id : B0
Network Status : Disconnected
Adapter Friendly Name : Ethernet 5
IPv4 Address : 169.254.121.151
Adapter User Name : -
Adapter PKey : -
Connect x2 is in Ethernet mode, no lights, Network settings show no cables plugged in.
Output of query:
:\Users\Administrator>flint -d mt26418_pci_cr0 query
Failed to identify the device - Can not create SignatureManager!
Image type: FS2
FW Version: 2.9.1000
Device ID: 26418
Description: Node Port1 Port2 Sys image
GUIDs: 0002c90300283dd2 5849560e629c0d01 5849560e629c0d02 0002c90300283dd5
MACs: 0002c9283dd2 0002c9283dd3
VSD:
PSID: MT_0F90120008
Querying Mellanox devices firmware ...
Failed to identify the device - Can not create SignatureManager!
Failed to identify the device - Can not create SignatureManager!
MLXUPD:
Device #1:
----------
Device Type: ConnectX2
Part Number: MHRH2A_A2
Description: ConnectX-2 VPI adapter card;dual-port QSFP;IB 20Gb/s & 10GigE;PCIe2.0x8 5.0GT/s;NCSI Enabled;RoHS R6
PSID: MT_0F90120008
PCI Device Name: mt26418_pci_cr0
Versions: Current Available
FW 2.9.1000 N/A
Output of putty connected to Aruba:
Port VendorName VendorSN ArubaSupported CableType
---- ---------- -------- -------------- ---------
GE0/1/0 Amphenol CN053HVN85S2ECA NO 10GBASE-DAC-P
Does appear to be getting a IP from switch, but outside of local network range...
Driver Version : 5.50.14740.0
Firmware Version : 2.9.1000
Port Number : 1
Bus Type : PCI-E 5.0 Gbps x8
Link Speed : ----
Part Number : MHRH2A-XSR
Device Id : 26418
Revision Id : B0
Network Status : Disconnected
Adapter Friendly Name : Ethernet 5
IPv4 Address : 169.254.121.151
Adapter User Name : -
Adapter PKey : -
Attachments
-
75.3 KB Views: 4
Last edited: