Good afternoon.
It is not possible to start the system on the Intel® Xeon® Platinum 8180 Processor
More information about the configuration:
There are 3 CPUs:
1. ES identical to Intel® Xeon® Platinum 8180 Processor (QL1F) - The system does not start.
2. ES identical to Intel® Xeon® Platinum 8180 Processor (QL1K) - The system does not start.
3. Intel® Xeon® Bronze 3104 Processor (I use it to test the performance of the motherboard and DDR4 memory) - The system on both motherboards is working, and the memory is fully defined.
There are 2 motherboards:
1. Tyan Tempest HX S7100 (S7100AG2NR)
2. Supermicro X11DAi-N
DDR4 - 2600 to 4Gb - 8 modules - tested and working with these motherboards.
More details about the problem and my attempts to launch the system:
Installed one and two processors, the system on the S7100 board does not display any picture on the screen and no signals.
Motherboard X11DAi-N - launches a video chip and displays a picture with information that the All channels are disabled due to memory test failures.
Updating the BIOS to different versions from the manufacturers site did not help to solve the problem.
Help solve the problem - how to run these CPUs?
It is not possible to start the system on the Intel® Xeon® Platinum 8180 Processor
More information about the configuration:
There are 3 CPUs:
1. ES identical to Intel® Xeon® Platinum 8180 Processor (QL1F) - The system does not start.
2. ES identical to Intel® Xeon® Platinum 8180 Processor (QL1K) - The system does not start.
3. Intel® Xeon® Bronze 3104 Processor (I use it to test the performance of the motherboard and DDR4 memory) - The system on both motherboards is working, and the memory is fully defined.
There are 2 motherboards:
1. Tyan Tempest HX S7100 (S7100AG2NR)
2. Supermicro X11DAi-N
DDR4 - 2600 to 4Gb - 8 modules - tested and working with these motherboards.
More details about the problem and my attempts to launch the system:
Installed one and two processors, the system on the S7100 board does not display any picture on the screen and no signals.
Motherboard X11DAi-N - launches a video chip and displays a picture with information that the All channels are disabled due to memory test failures.
Updating the BIOS to different versions from the manufacturers site did not help to solve the problem.
Help solve the problem - how to run these CPUs?
Attachments
-
175.9 KB Views: 59
Last edited: