So I swapped from a Mellanox connectx2 (which worked perfectly OK) to a Chelsio t420 on my esxi box and I am having trouble getting network traffic over it.
I've installed the latest beta drivers, 1.4.1 on the box, the Nic is detected and it sees the network up/down. But no observed IP range is given.
The card worked fine in my windows box. As does the Mellanox.
Tried setting the rate to 10000mbit, tried auto negotiate.. Any ideas?
I've installed the latest beta drivers, 1.4.1 on the box, the Nic is detected and it sees the network up/down. But no observed IP range is given.
The card worked fine in my windows box. As does the Mellanox.
Tried setting the rate to 10000mbit, tried auto negotiate.. Any ideas?
Last edited: