Hi,
I'm new to servers and especially home servers, but I have built PCs before. I have a gigabyte MZ31-AR0 EPYC SP3 motherboard and I can't get any video signal out of it. I have heard that you can power up the motherboard with no CPU or RAM in it. But when I try that, the BMC led stays solid for a minute or more and then blinks. I assume that means it is working. But I get no video output on the vga port.
I have it plugged into an old Antec Truepower 650 watt power supply on my bench, and a keyboard in one of the usb ports. When I put my CPU in and one stick of ram, it also does not give any video. I tried putting a discrete graphics card and that didn't produce video either. The ram i have is samsung 8GB PC4-19200 DDR4 ECC M393A1G43DB1-CRC0Q
Is there a way to connect to the ethernet port to see what's going on? Or is my ram or mobo bad?
Thanks for any help!
I'm new to servers and especially home servers, but I have built PCs before. I have a gigabyte MZ31-AR0 EPYC SP3 motherboard and I can't get any video signal out of it. I have heard that you can power up the motherboard with no CPU or RAM in it. But when I try that, the BMC led stays solid for a minute or more and then blinks. I assume that means it is working. But I get no video output on the vga port.
I have it plugged into an old Antec Truepower 650 watt power supply on my bench, and a keyboard in one of the usb ports. When I put my CPU in and one stick of ram, it also does not give any video. I tried putting a discrete graphics card and that didn't produce video either. The ram i have is samsung 8GB PC4-19200 DDR4 ECC M393A1G43DB1-CRC0Q
Is there a way to connect to the ethernet port to see what's going on? Or is my ram or mobo bad?
Thanks for any help!