Hello!
I've been mining with an S2600IP with both CPU sockets populated, and no matter what configuration of riser positions in the PCIe slots, I cannot boot with more than 4 GPUs.
I'm using GTX 1070s for this setup.
I can boot with 4GPUs using most PCIe arrangements, but the moment I try to put a 5th, it does not fully boot.
When I say it doesn't fully boot, it beeps like it's normally passed POST, but I get no video out from any card, and it never boots into windows.
Am I missing some sort of BIOS setting or something else I am overlooking to make this work?
I have updated everything on the motherboard to the most recent version, if that helps.
Thank you for any input you may have, and your time.
I've been mining with an S2600IP with both CPU sockets populated, and no matter what configuration of riser positions in the PCIe slots, I cannot boot with more than 4 GPUs.
I'm using GTX 1070s for this setup.
I can boot with 4GPUs using most PCIe arrangements, but the moment I try to put a 5th, it does not fully boot.
When I say it doesn't fully boot, it beeps like it's normally passed POST, but I get no video out from any card, and it never boots into windows.
Am I missing some sort of BIOS setting or something else I am overlooking to make this work?
I have updated everything on the motherboard to the most recent version, if that helps.
Thank you for any input you may have, and your time.
