FYI the board needs a cmos reset every time you plug in something new.Tried a second OCP NIC (CX3) and the result is the same, the board doesn't detect the card at all, tried changing bifurication and ASPM settings with no luck.
FYI the board needs a cmos reset every time you plug in something new.Tried a second OCP NIC (CX3) and the result is the same, the board doesn't detect the card at all, tried changing bifurication and ASPM settings with no luck.
That's odd I didn't have that issue with the M.2 or GPUs I've plugged in, is that only for OCP?FYI the board needs a cmos reset every time you plug in something new.
TheBariBest,帖子:333700,成员:42150 said:清单在这里。希望把它作为一个便宜的第一块 LGA 3647 板,供一个在 LGA-2011 上生活太久的人使用。最终可能会将其与 8160 ES QKG9 配对。有谁知道那个CPU可以在这个板上工作吗?
[/引用]
○ok
Press and hold the button on the rear to power cycle the box. short press just resets.Anyone able to figure out whether there are in fact power button headers on the board? Seems plugging and unplugging the power cable is an inconvenient way to power cycle it