@RolloZ170 I tried it - hidden options did show up but changing the Primary Video Adaptor to IGD didn't change anything - whether I enabled the IDG (option basically right above it) or not. Still used the A310...
EU Gigabyte Mainboard MC12-LE0 Re1.0 AMD B550 AM4 Ryzen
- Thread starter flobert
- Start date
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
unfortunaly i can't test anything, i sold my board because i don't need it.
worked for me but was older BIOS and CPU without iGPU.
Just looked again and made sure that the iGPU was actually disabled by the hidden IGD option - it was. Still no output from the Aspeed VGA...
New BMC Firmware is out
New BMC Firmware is out
No. | Type | Issue Description | Note |
12.61.39 | |||
1 | F | [feature] Update new pci devices support | |
2 | F | [defect] Fix the backup/restore function that does not retain alert information. | |
3 | F | [feature] Remove SSH service. | |
4 | B | [redfish][defect] Resolve the NTP does not synchronize between web and Redfish. | |
5 | B | [redfish][defect] Resolve the issue that Redfish cannot patch the NTP server. |
How can I enable Redfish? I would've thought that would be in the BMC. So far I only saw it in the hidden options of the BIOS.
Just a short question: How to insert an ISO Image trough webgui / IPMI fast and correctly? I dont have another server providing iso`s yet. Tried with H5viewer, isnt really working.
I'm running a 5650G so i would assume 5655G works too. Probably requires an updated bios.
iGPU works too but other posts in this thread says there is some wonkyness if you want to have a monitor connected. You will have to go search, i think it was either no option to have iGPU display out or issues with remote control display with a monitor connected. Memory is foggy.
Nevermind, turns out I'm blind!
Last edited:
5900XT !=5900XAt least one guy says it works. I sure hope so - once my desktop retires, my 5900x goes into the server
It's closer to a 5950x and it launched last year.
while the 5950x is on the QVL
I would stick it in 65W mode if you plan on running it. At 125W full fat mode it has some stability issues. Speaking from experience there.
I can confirm this. We had issues with cooling and stability. Even though CPU kept himself at 90°C (or 80 I don't remember), system rebooted itself sometimes. We run 100% workload 24/7.
TPM can be disabled by Trusted Computing -> Security Device Support (Disbaled) right? Can i disable fTPM too?