Getting xmr-cpu-stak to generate recommend cpu/thread configuration

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

jims2321

Active Member
Jul 7, 2013
184
44
28
Can't seem to find the thread that explains how to get xmr-cpu-stak to generate the recommended cpu/thread and cpu config values the first time you run it. Any help would be appreciated.
 

Klee

Well-Known Member
Jun 2, 2016
1,289
396
83
If you run the newer versions the first time you run it in a terminal it will spit out a example of how to configure your config file, and all you do is copy and paste that to your config then fire it up again and you should be set.
 

jims2321

Active Member
Jul 7, 2013
184
44
28
so with 18 threads using the recommended cpu_conf my hashrate is

[2017-10-03 02:43:26] : Difficulty changed. Now: 40350.
[2017-10-03 02:43:26] : New block detected.
HASHRATE REPORT
| ID | 2.5s | 60s | 15m | ID | 2.5s | 60s | 15m |
| 0 | 45.4 | 45.9 | (na) | 1 | 31.1 | 31.3 | (na) |
| 2 | 33.6 | 33.9 | (na) | 3 | 33.6 | 33.9 | (na) |
| 4 | 58.7 | 58.7 | (na) | 5 | 59.2 | 59.2 | (na) |
| 6 | 59.2 | 59.2 | (na) | 7 | 43.4 | 43.4 | (na) |
| 8 | 43.5 | 43.4 | (na) | 9 | 43.6 | 43.6 | (na) |
| 10 | 43.6 | 43.6 | (na) | 11 | 59.2 | 59.2 | (na) |
| 12 | 59.2 | 59.2 | (na) | 13 | 59.1 | 59.1 | (na) |
| 14 | 45.8 | 45.7 | (na) | 15 | 31.2 | 31.2 | (na) |
| 16 | 33.7 | 33.7 | (na) | 17 | 33.7 | 33.7 | (na) |
-----------------------------------------------------
Totals: 817.0 818.1 (na) H/s
Highest: 818.4 H/s

Looking into disabling NUMA and THP to see if that impacts the hashing rate