Trying to update the firmware on a Fusion-io / Sandisk SX300 1.6TB that is a HP and here is what I get:
Running fio-status:
Any ideas on getting this to work? Maybe @Patriot
Running fio-status:
Code:
C:\>fio-status
Found 1 VSL driver package:
4.2.5 build 1266 Driver: loaded
Found 1 ioMemory device in this system
Adapter: ioMono (driver 4.2.5)
HP 1.6TB HH/HL Value Endurance (VE) PCIe Workload Accelerator, Product Number:763836-B21, SN:___
PCIe Power limit threshold: 24.75W
Connected ioMemory modules:
fct0: 83:00.0, Product Number:763836-B21, SN:___
fct0 Status unknown: Driver is in MINIMAL MODE:
The firmware on this device is not compatible with the currently installed version of the driver
ioMemory Adapter Controller, Product Number:763836-B21, SN:___
!! ---> There are active errors or warnings on this device! Read below for details.
PCI:83:00.0, Slot Number:2
Firmware v8.5.28, rev 116474 Public
Geometry and capacity information not available.
ACTIVE WARNINGS:
The ioMemory is currently running in a minimal state.