Fujitsu PRAID CP400i, PCIe 3.0 x8 (S26361-F3842-L501) [Opinion]

Discussion in 'RAID Controllers and Host Bus Adapters' started by iops-cloud, Feb 21, 2017.

  1. iops-cloud

    iops-cloud New Member

    Joined:
    Sep 30, 2016
    Messages:
    7
    Likes Received:
    0
    #1
    Last edited: Feb 22, 2017
  2. BobbyB

    BobbyB Member

    Joined:
    Dec 26, 2016
    Messages:
    32
    Likes Received:
    9
    I'm about to order the very same controller or two but will not cross-flash, as it's going into a Fujitsu TX1330M2.
    Seems the cheapest 3008 controller outside Ebay, several SAS SSDs and 8TB WD Reds will be connected to it, via napp-it in ESX 6.2.
    Should have it late next week, any info you would be looking for?
     
    #2
  3. iops-cloud

    iops-cloud New Member

    Joined:
    Sep 30, 2016
    Messages:
    7
    Likes Received:
    0
    Hi BobbyB,

    I'm planning to plug it into a Supermicro X9 motherboard. In the case you have one, can you confirm it boots properly ?

    Thanks
     
    #3
  4. iops-cloud

    iops-cloud New Member

    Joined:
    Sep 30, 2016
    Messages:
    7
    Likes Received:
    0
    Hi BobbyB,
    Any chance to have it tested in a Supermicro mobo?

    Thanks
     
    #4
Similar Threads: Fujitsu PRAID
Forum Title Date
RAID Controllers and Host Bus Adapters Fujitsu D2616 and Fastpath Jan 10, 2019
RAID Controllers and Host Bus Adapters Old Fujitsu Board and any HBA - only beeping Nov 29, 2017
RAID Controllers and Host Bus Adapters [Solved] Fujitsu D2607-A21 cannot be flashed May 30, 2017
RAID Controllers and Host Bus Adapters Fujitsu D2616 issues (and LSI SAS9201-8i question) Jan 9, 2017
RAID Controllers and Host Bus Adapters Fujitsu 9211-8i D2607 LSISAS2008 wont flash to anything Dec 26, 2016

Share This Page