[FS][USA-HOU-TX][Local Only] x2 Dell PowerEdge VRTX Tower Chassis Unpopulated, 1 SFF, 1 LFF

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

frogtech

Well-Known Member
Jan 4, 2016
1,482
272
83
35
Selling two Dell PowerEdge VRTX converged chassis, specs / details below:

VRTX #1
  • Tower Configuration w Caster Kit
  • 25x2.5" SAS Drive Bays, Includes 25 Trays /w Screws
  • x1 Chassis Management Controller /w Enterprise License
  • x1 Shared PERC8 SAS RAID Controller
  • x4 1100W PSUs
  • x1 R1-2401 1 GbE Switch Module
  • x4 Blade Blanks
  • x1 Front Bezel
VRTX #2
  • Tower Configuration w Caster Kit
  • 12x3.5" SAS Drive Bays, Includes 12 Trays /w Screws
  • x1 Chassis Management Controller /w Enterprise License
  • x1 Shared PERC8 SAS RAID Controller
  • x4 1100W PSUs
  • x1 R1-2401 1 GbE Switch Module
  • x4 Blade Blanks
  • x1 Front Bezel
Please feel free to PM me with any questions (or post here). Both of these are in fantastic cosmetic condition and look like new. Internals are extremely clean. All fan and blower modules are included. Each tower supports up to x4 M520, M620, M630, and M640 blades.

Product details: https://i.dell.com/sites/csdocument...ts_Documents/en/poweredge_vrtx_spec_sheet.pdf

Timestamps: vrtx

$1000 each, local pick up only in the Houston, TX area.
 
Last edited:
  • Like
Reactions: Samir and Aestr

frogtech

Well-Known Member
Jan 4, 2016
1,482
272
83
35
So, honestly, my asking price is probably a bit much. I am just going to sell these chassis unpopulated, and cut to the price to a 10th of what it was and part out the rest. I'm likely going to be moving to a Xeon-D based lab for personal reasons.

Updated OP/title to reflect that.
 

BOF007

New Member
Mar 22, 2021
3
0
1
Selling two Dell PowerEdge VRTX converged chassis, specs / details below:

VRTX #1
  • Tower Configuration w Caster Kit
  • 25x2.5" SAS Drive Bays, Includes 25 Trays /w Screws
  • x1 Chassis Management Controller /w Enterprise License
  • x1 Shared PERC8 SAS RAID Controller
  • x4 1100W PSUs
  • x1 R1-2401 1 GbE Switch Module
  • x4 Blade Blanks
  • x1 Front Bezel
VRTX #2
  • Tower Configuration w Caster Kit
  • 12x3.5" SAS Drive Bays, Includes 12 Trays /w Screws
  • x1 Chassis Management Controller /w Enterprise License
  • x1 Shared PERC8 SAS RAID Controller
  • x4 1100W PSUs
  • x1 R1-2401 1 GbE Switch Module
  • x4 Blade Blanks
  • x1 Front Bezel
Please feel free to PM me with any questions (or post here). Both of these are in fantastic cosmetic condition and look like new. Internals are extremely clean. All fan and blower modules are included. Each tower supports up to x4 M520, M620, M630, and M640 blades.

Product details: https://i.dell.com/sites/csdocument...ts_Documents/en/poweredge_vrtx_spec_sheet.pdf

Timestamps: vrtx

$1000 each, local pick up only in the Houston, TX area.
would you be willing to sell one of the ent CMC licenses ?