[FS] [US] Supermicro X9 + Xeons + DDR3 ECC UDIMM memory

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

J--

Active Member
Aug 13, 2016
202
53
28
41
Moving some of this hardware, I have multiples of most things for redundancy.

These setups measured ~30w idle/80w max on my Kill-a-watt iirc, which is respectable while being powerful enough for a fair bit of virtualization.

3 x X9SCi-LN4F (quad 1GbE) - Supermicro | Products | Motherboards | Xeon® Boards | X9SCi-LN4F
2 x X9SPU-F (dual 1GbE, special form factor for a dual height PCIe 3.0 x16 card in a 1U) - Supermicro | Products | Motherboards | Xeon® Boards | X9SPU-F
2 x Xeon E3-1265L (4C/8T low power, IGP for Quicksync)
1 x Xeon E3-1270 (4C/8T higher TDP, no Quicksync)
13 x 8GB DDR3 ECC UDIMM (11x Hynix sticks, 2 VLP, 2 Kingston branded Hynix sticks)
2 x 4GB DD3 ECC UDIMM (2x Hynix)

Prices are $60/motherboard, $50/CPU, $25/stick for the RAM. Discounts for multiples, but they're priced aggressively as is (below eBay).


Thanks!
 

Wasmachineman_NL

Wittgenstein the Supercomputer FTW!
Aug 7, 2019
1,880
620
113
Damn, if only you were in the EU.. I could have used 2x8GB DDR3 DIMMs for that kind of money.