Proof:
I present to you, the beast! I am downsizing with my 2nd child on the way. This has been lightly used in a homelab environment, running 24/7 for the past ~2 years. The noise is surprisingly good with this having all aftermarket fans and quiet PSU. Still gets good static pressure. I had it next to my kitchen and my wife tolerated it ha.
I am looking to sell the entire beast with sas3+nvme expanders + rails + mb/ram/cpu/nvme combo + pcie cards.
ALL SOLD!
The price is $1300 + shipping; the U.2 drives are separately priced.
Supermicro Case CSE-847 36-bay chassis SAS3/NVME
NVME U.2 SSD drives (separately priced - make offers):
I present to you, the beast! I am downsizing with my 2nd child on the way. This has been lightly used in a homelab environment, running 24/7 for the past ~2 years. The noise is surprisingly good with this having all aftermarket fans and quiet PSU. Still gets good static pressure. I had it next to my kitchen and my wife tolerated it ha.
I am looking to sell the entire beast with sas3+nvme expanders + rails + mb/ram/cpu/nvme combo + pcie cards.
ALL SOLD!
Supermicro Case CSE-847 36-bay chassis SAS3/NVME
- SAS3 expander backplanes, BPN-SAS3-846-EL1 & BPN-SAS3-826-EL1-N4
- 4x NVME SSD U.2 PCIe 3.x ports (or SATA/SAS3 if you plug in regular drives)
- 2x NVME PCI-E cards & cables to enable NVME on the rear NVME/SAS3 backplane
- Bought these cards and cables new from Supermicro in 2021
- 1x SAS3 2-port internal to external port adapter with cables to hook up external JBOD
- 4x fans replaced with quieter supermicro variants
- 3x original fans will be included in box, since the chassis takes 7 (i run it with 4 to keep noise down)
- 1x 1k28w SQ super-quiet PSU
- 2x rear hotswap 2.5" sas3/sata3 ssd
- 32x standard caddies & screws included
- 4x tool-free 2.5" caddies (for nvme drives)
- 4x internal sas3 backplane cables
- Rev B (newer) inner and outer Supermicro rails
- Front cover with lock/keys (keeps kids from popping drives out)
- adequate packaging to support the beast
- X10DRH-CT dual cpu motherboard w/ bifurcation
- 8x 32gb ECC DDR4 2133mhz RDIMMs (HMA84GR7MFR4N-TF)
- 8 slots free
- 2x E5-2640V4 2.4ghz CPUs, 10/20 cores each for a total of 20/40 cores
- 32gb Supermicro SATA3 SATADOM (used to boot from nvme drives)
- 2x 2U Supermicro 2U active HSF with quieter fans
- 1x LSI 3008 SAS3 2-port HBA, low-profile, with cables
NVME U.2 SSD drives (separately priced - make offers):
- 2x HGST SN200- 6.4tb NVME SSD U.2 drives (HUSMR7664BDP301), used (90%+ life remains) - 3DWPD resiliance
- Separately for $350 each
- 1x HGST SN630- 4tb NVME SSD U.2 drives, new w/ ~3 yrs warranty (100% life, only tested for a week or so)
- Separately for $200
- 1x Intel Optane 900P- 280gb NVME SSD U.2 drives, (99%+ life remains)
- Separately for $150
Last edited: