FS: [US-MA] Sophos XG 210 Rev. 2 Firewall Appliance

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

starheaven

New Member
Aug 21, 2018
26
14
3
I have a Sophos XG 210 Rev. 2 Firewall Appliance for sale.

It has an upgraded CPU Dual Core Intel(R) Core(TM) i5-4570T CPU @ 2.90GHz (35W TDP) will include original Celeron /w 65W TDP.
8GB RAM
Intel® SSD 530 Series 120GB
6 built-in 1GigE Intel NICs with a possibility to extend with a module.
I don't have rack ears.

Detailed specs could be found at: https://community.sophos.com/cfs-fi...onents-files/136/Sophos_2D00_XG_2D00_Rev1.pdf

It can run Sophos XG Firewall (Home Edition is free) or pfSense (currently has pfSense 2.5.0 development installed).

Looking for $260, includes shipping within continental US.
 

Attachments

Last edited:
  • Like
Reactions: Samir

abq

Active Member
May 23, 2015
675
204
43
Free bump - I like your i5-4570T upgrade :). ...I assume your XG210 come with a base firewall license? Does this include any other licenses or port plugins? Something like Network License, TotalProtect, or Enterprise Connect? Thanks Much !
 
  • Like
Reactions: Samir

starheaven

New Member
Aug 21, 2018
26
14
3
Appliance does not come with any licenses unfortunately. You can get a free license for XG Firewall Home Edition if needed but that would limit usable RAM to 6GB. I have found pfSense to be much more feature rich though and performance is more than adequate for multiple Gbps.
 
  • Like
Reactions: Samir

Billy1

New Member
Jun 21, 2020
14
5
3
Good afternoon I'm getting started with networking linux all the good stuff.. My queston is would i need anything else to make this firewall work? Also is there info that could help me get it configured?? Thank you ..
 
  • Like
Reactions: Samir

starheaven

New Member
Aug 21, 2018
26
14
3
Hi Billy1,

Appliance has with pfSense 2.5.0 snapshot pre-installed (Download pfSense Community Edition). It's one of the best and most feature-rich open source FreeBSD based firewall/router distributions. All you need to get started is a VGA cable/monitor and USB keyboard to re-configure LAN address if default 192.168. 1.1 does not work for your network. It also supports any other distribution that can be installed onto a PC, like Sophos XG Firewall or VyOS or OpnSense.

It has default configuration that should work for regular DHCP based Internet connection. General Information | pfSense Documentation docs are pretty descriptive too.
 
  • Like
Reactions: Samir