Hello Everyone! I've decided to upgrade, and as a result I now have an excess ICX 7250-48 that I'd like to sell. It has got 48 1Gb ports, as well as 8x 1/10Gb SFP+ Cages.
Switch will come with rack ears, power cord, firmware loaded from fohdeesha's guide, and a blank configuration. (The switch has a management IP of 192.168.1.3 which I used to upload the new firmware) You can license this switch to do all sorts of awesome stuff, including L3 Routing (No BGP unfortunately) and 8x 10GB Ports. Below is the output for show version.
Copyright (c) 2017 Ruckus Wireless, Inc. All rights reserved.
UNIT 1: compiled on Aug 17 2018 at 18:25:18 labeled as SPR08080a
(29815920 bytes) from Primary SPR08080a.bin
SW: Version 08.0.80aT213
Compressed Boot-Monitor Image size = 786944, Version:10.1.13T215 (spz10113 )
Compiled on Tue Jul 24 10:22:26 2018
HW: Stackable ICX7250-48
==========================================================================
UNIT 1: SL 1: ICX7250-48 48-port Management Module
Serial #: {Hidden}
Software Package: ICX7250_L3_SOFT_PACKAGE (LID: {also hidden})
Current License: l3-prem-8X10G
P-ASIC 0: type B344, rev 01 Chip BCM56344_A0
==========================================================================
UNIT 1: SL 2: ICX7250-SFP-Plus 8-port 80G Module
==========================================================================
1000 MHz ARM processor ARMv7 88 MHz bus
8192 KB boot flash memory
2048 MB code flash memory
2048 MB DRAM
STACKID 1 system uptime is 17 minute(s) 43 second(s)
The system started at 08:18:22 GMT+00 Wed Jul 17 2019
The system : started=cold start
I would like to get $250 for the switch, plus shipping.
Switch will be shipped by the buyers choice of shipper, in a box that measures 23 x 22 x 9 in. and weighs about 14lbs. If you'd prefer, you can provide me a prepaid shipper and I'll drop it off at the local shipping office. I am located in zipcode 01201.
Switch will come with rack ears, power cord, firmware loaded from fohdeesha's guide, and a blank configuration. (The switch has a management IP of 192.168.1.3 which I used to upload the new firmware) You can license this switch to do all sorts of awesome stuff, including L3 Routing (No BGP unfortunately) and 8x 10GB Ports. Below is the output for show version.
Copyright (c) 2017 Ruckus Wireless, Inc. All rights reserved.
UNIT 1: compiled on Aug 17 2018 at 18:25:18 labeled as SPR08080a
(29815920 bytes) from Primary SPR08080a.bin
SW: Version 08.0.80aT213
Compressed Boot-Monitor Image size = 786944, Version:10.1.13T215 (spz10113 )
Compiled on Tue Jul 24 10:22:26 2018
HW: Stackable ICX7250-48
==========================================================================
UNIT 1: SL 1: ICX7250-48 48-port Management Module
Serial #: {Hidden}
Software Package: ICX7250_L3_SOFT_PACKAGE (LID: {also hidden})
Current License: l3-prem-8X10G
P-ASIC 0: type B344, rev 01 Chip BCM56344_A0
==========================================================================
UNIT 1: SL 2: ICX7250-SFP-Plus 8-port 80G Module
==========================================================================
1000 MHz ARM processor ARMv7 88 MHz bus
8192 KB boot flash memory
2048 MB code flash memory
2048 MB DRAM
STACKID 1 system uptime is 17 minute(s) 43 second(s)
The system started at 08:18:22 GMT+00 Wed Jul 17 2019
The system : started=cold start
I would like to get $250 for the switch, plus shipping.
Switch will be shipped by the buyers choice of shipper, in a box that measures 23 x 22 x 9 in. and weighs about 14lbs. If you'd prefer, you can provide me a prepaid shipper and I'll drop it off at the local shipping office. I am located in zipcode 01201.
Last edited: