[FS] [US-CA] Rtx 6000 Pro Blackwell, Epyc 9184x (Dell locked), Epyc Siena CPU + Board combo, Kioxia CD6-R NVMEs, Omada APs

[autoturk]

Trying to downsize! Located in the SF Bay Area. Accepting Venmo or Paypal (G&S) with free shipping to continental US.

Part	Price	Description	Condition
Supermicro X10SDV-12C-TLN4F	$450	Xeon D-1557 12 Core/24 Thread Mini-ITX	Brand New in box
Asrock Rack D1541D4U-2L+	$200	Xeon D-1541 8 Core/16 Thread Micro-ATX Very versatile board: 2 x m.2, 1x PCIe3.0x16, 1x PCIe3.0x8, 6 SATA, accepts RDIMMs or UDIMMs Doesn't have 10 GB ethernet, this could be an advantage (could use lower power SFP+ adapters) or disadvantage depending on your use case	Brand New in box
PNY RTX 6000 Pro Blackwell Workstation edition	$7300	Brand new, sealed Bought for a project that never materialized Bought retail from Dell so warranty is still valid.	Brand new
AMD EPYC 8324p 32 core Siena processor + Asrock rack Sienad8-2L2t motherboard	$1500	lightly used Not vendor locked.	Used
Kioxia CD6-r U.3 960gb PCie 4.0 NVME	$200	Have multiple Sealed, brand new	New
AMD Epyc 9184x - Dell locked	$500	Used, good condition Dell Locked	Used
Asus Pro WS WRX90E-SAGE SE Threadripper 7000/9000 motherboard	$800	Gently used. Have all accessories	Used
3 x Tp-Link Omada EAP 670 Access points	$250	Have two EAP 670 v2 (the thin ones) and one v1, the chunky one Used the chunky for last two years without issue, installed v2 APs recently but decided to switch to Ruckus Have been running them off of a PoE switch. Have mounting plates and AC adapters	Used

 

[Samir]

Free bump for another Bay Area labber.

 

[race2c]

PM sent

 

[zac1]

A grateful bump for your time. Thanks for your consideration.

 

[doughnet]

Bump from another California’n

 

[Wasmachineman_NL]

Define R4 my beloved, still have mine in storage.

 

[autoturk]

Define R4 my beloved, still have mine in storage.

I’ve always dreamed of using it to its full potential by stuffing it with a million drives, but of course it just ends up with a single drive

 

[Wasmachineman_NL]

I’ve always dreamed of using it to its full potential by stuffing it with a million drives, but of course it just ends up with a single drive

Tossed the HDD cages out of mine quite early on when I got it in September 2016 as a entire computer.

 

[D4M4EVER]

PM sent

 

[shadowplay0]

Those two ASROCK boards say they support one 3.0x16 and one 3.0x8. If that's at all accurate, you're underselling them! I'm tempted, but I don't have a project anywhere near ready to proceed using them. Take a free bump instead!

Maybe if you still have them when I do decide to move on that sort of project I'll bite. Am Bay Area also so meeting locally would be an option

 

[autoturk]

Those two ASROCK boards say they support one 3.0x16 and one 3.0x8. If that's at all accurate, you're underselling them! I'm tempted, but I don't have a project anywhere near ready to proceed using them. Take a free bump instead!

Maybe if you still have them when I do decide to move on that sort of project I'll bite. Am Bay Area also so meeting locally would be an option

Ah yeah you’re right! I remembered the wrong spec from the 10gb version. I’ll check bifurcation settings tonight to see if it can be split. Would be cool to have 6x nvme without a PLX. Thanks for the heads up!

out of curiosity what would you use both slots for?

 

[shadowplay0]

out of curiosity what would you use both slots for?

Not sure what I would use them for, but having the option of going up to x16 for some network cards would be nice. AIUI 100Gbe cards can generally run at 40G speeds, which would give me more options. If the x8 slots support bifurcation, could use that to connect a 2x NVMe card for zippy redundant boot volumes?

My wallet is still crying over my just completed project revamping my gaming computer (even an open box 4090 is spendy) so this is all hypothetical

 

[autoturk]

Not sure what I would use them for, but having the option of going up to x16 for some network cards would be nice. AIUI 100Gbe cards can generally run at 40G speeds, which would give me more options. If the x8 slots support bifurcation, could use that to connect a 2x NVMe card for zippy redundant boot volumes?

My wallet is still crying over my just completed project revamping my gaming computer (even an open box 4090 is spendy) so this is all hypothetical

Congrats on the new system! And you're right I hadn't considered >10gb lan on these.

I just checked on bifurcation on the latest 1.40 BIOS: The x16 slot supports up to x4x4x4x4 bifurcation, but the x8 slot does not bifurcate. Also FYI The m.2 slots run on PCIe2.0x1, so they are essentially running at SATA speeds.

 

[autoturk]

sold a few things so did some clean up. bump!

 

[rmcfadzean]

Picked up the switch. Super easy and crazy fast mailing. Thanks @autoturk!

 

[autoturk]

Sold one of the Asrock D1521 boards, still have a few more!

 

[autoturk]

price drops!

 

[getuzer64]

you have a message

 

[autoturk]

Bump. Work is downsizing, so trying to downsize my garage myself to prep. Feel free to make an offer.

 

[autoturk]

bump. added 2 TB 980 Pro