Downsizing my homelab is finished for now. Thanks everyone!
Last edited:
EU [FS] Sold
- Thread starter insurgensy
- Start date
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
Just a small FYI for everybody interested in mini PC Kontron D3544-S2 - J4105 / 8Gb as an adept for pfsense,
it is dual gigabit, but only one of them is Intel, the other is Realtek...
the linked specs sheet says it clearly:
NETWORK CONNECTION ETHERNET
1x Intel® i210 with 10/100/1000MBit/s,
1x Realtek RTL8111G with 10/100/1000 MBit/s
Otherwise it is great mini PC, I am using it as fanless Kodi client...
it is dual gigabit, but only one of them is Intel, the other is Realtek...
the linked specs sheet says it clearly:
NETWORK CONNECTION ETHERNET
1x Intel® i210 with 10/100/1000MBit/s,
1x Realtek RTL8111G with 10/100/1000 MBit/s
Otherwise it is great mini PC, I am using it as fanless Kodi client...
Futro uses D3544-Ax, lacks the Sata ports and one LAN port replace with USB-C on the back.
Thanks guys, updated the post!
Kontron board is great for Kodi, but I personally feel like it can be better utilised with those 2 SATA ports and fan header
Last edited:
Do you know if the Kontron D3544-S2 can setup serial port redirection? So it can show bios/boot over the serial port?
Unfortunately I don't and I wouldn't even know where to start. It does come with RS-232 COM connector on the back tho
Last edited:
The MC12-LE0 has arrived safely, and it's in perfect condition.
Hopefully my last order gets here next week, so I can test it properly and give it a new home (will update this post).
Thank you insurgensy for the quick and safe delivery, it was a pleasure!
Update: Finally my last component arrived so I could assemble the system. The mb works perfectly, just as advertised/expected
Hopefully my last order gets here next week, so I can test it properly and give it a new home (will update this post).
Thank you insurgensy for the quick and safe delivery, it was a pleasure!
Update: Finally my last component arrived so I could assemble the system. The mb works perfectly, just as advertised/expected
Last edited:
Received the Lenovo M720q with a free 3D-printed slot cover, quick, safely packaged and exactly as described. Thanks!