FS: short-depth 1U supermicro build: E5-2696 v2, 10GbE, 4 SAS3 SSDs, LSI 3008

Discussion in 'For Sale/ For Trade/ Want to Buy' started by frogtech, Dec 7, 2018.

  1. frogtech

    frogtech Well-Known Member

    Jan 4, 2016
    Likes Received:
    Hi there, selling a custom build I did that I was going to use as 1 of 4 nodes but went another route.
    The full spec list is as follows:
    • SuperMicro SC515-350 1U, short-depth rackmount chassis (16.9" deep)
    • SuperMicro X9SRW-F Motherboard, Rev 1.20
    • Intel Xeon E5-2696 v2, 12-core CPU
    • 16GB DDR3 ECC 1333mhz ram (8x 2GB modules)
    • Dell HBA330+, LSI 3008 chipset adapter in IT mode
    • ConnectX-3 Pro 10GbE, dual-port SFP+
    • QTY 4 HUSMM8040ASS205, HGST SAS3 400GB SSD (1.6TB raw total, 1.15GB read, 700MB write per device)
    The chassis was purchased new through SuperMicro and is basically un-used. Never rackmounted, includes rails. Plastic is still on the top cover. Everything is tested and working, refer to the timestamp album for pics. There is an open PCIe x8 slot on the left riser that would be perfect for a light-weight M.2 NVMe boot device.

    Asking $1200 shipped paypal/local cash to US50. Just looking to get back what I spent on individual parts, not valuing the RAM at all in this as I don't have any spare to throw in aside from these 2GB modules I use for testing. Feel free to PM with any questions. Not looking for trades at this time.
    Last edited: Dec 7, 2018
Similar Threads: short-depth supermicro
Forum Title Date
For Sale/ For Trade/ Want to Buy FS: SuperMicro 721 NAS /w Mobo, CPU,RAM & SuperMicro 515 short-depth barebones with LGA2011 Mobo Dec 31, 2018
For Sale/ For Trade/ Want to Buy FS: 10GbE Switches (IBM G8124 and G8124-e), SuperMicro 825M 2U Short-Depth Chassis, Misc. Dec 26, 2017
For Sale/ For Trade/ Want to Buy FS Supermicro 2U 216 2011v3 Server May 20, 2019
For Sale/ For Trade/ Want to Buy FS: Supermicro 2U 4 nodes server 2022TG-HTRF May 18, 2019
For Sale/ For Trade/ Want to Buy 8c XeonD - Supermicro Motherboard May 18, 2019

Share This Page