FS - Precision 3420, Norco 4220 JBOD

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

cw823

Active Member
Jan 14, 2014
414
189
43
PMC NVDRAM PCA-00364-03-C NVRAM Card
Purchased for a project that changed directions.
$90 shipped




Precision 3420 x4
Dell Precision 3420
E3-1245 v5
24GB (3x8GB) memory
Dell x520-DA2 10Gbe
$240 local to Ohio as I don’t have boxes to ship. Have four but need to sell 1 and a time as I replace them. Have been running ESX 6.7 u3 for the last year or so


paypal preferred to cw823@hotmail.com. No trades ATM.


SOLD ITEMS
4x FusionIO IOscale 1.3TB MLC PCIE SSD. Firmware 7.1.17 (116786)
D0031 - 100% reserve, 0.051PB used.
D1662 - 100% reserve, 0.458PB used.
D1821 - 100% reserve, 0.338PB used.
D1866 - 100% reserve, 1.987PB used.
SALE PENDING - $90 shipped cont. US per, or all 4 for $300 shipped cont. US

Unifi US-16-XG in perfect condition; latest firmware reset to factory defaults. $390 shipped cont. US

X10SRL-F/e5-2630v3/80GB combo:
Supermicro X10SRL-F (no IO shield)
E5-2630 v3 CPU
2u passive heatsink
(80GB) 5x16GB DDR4 ECC RDIMM
latest BIOS, latest IPMI
$230 shipped cont. US

Norco RPC-4220
120mm fan wall (no hot-swap). Has Deltas installed, will include Noctua and maybe 3 other high cfm fans.
2x80mm Noctua at rear.
All drive trays - one POSSIBLE bad port with replacement backplane on way from Norco (shipped 2/28/20)
Supermicro X9SCM-F mobo installed for power to HP SAS Expander
Corsair 650w PSU
LSI 9207-8E with IT firmware 20.07
1M external SAS to SAS cable for connection between HP SAS expander & LSI 9207-8e
$280 shipped cont. US
 
Last edited:

cw823

Active Member
Jan 14, 2014
414
189
43
Haven't heard back on the PM I had sent to confirm payment on this. Was it sold to someone else before my posting?
Yes, apologies.

I also added a few pics, although it's a mess right now and needs all the JBOD stuff reinstalled after I blew the dust of the case. PSU is a corsair RM-650X
 

cw823

Active Member
Jan 14, 2014
414
189
43
I'd be fine with that. Though if someone closer is interested, please sell to them first. International shipping is always a pain.

Also, what's the story with the replacement backplane?

Thanks!
One drive wasn't detected. It could also be a cable, I'll know for sure this weekend, but knowing these can be problematic I am having a replacement shipped as well. If it's just the cable I"ll swap that out and then you'll get an extra backplane.

This was full of 8TB WD drives before removed from service in my homelab.
 

cw823

Active Member
Jan 14, 2014
414
189
43
SALE pending for the norco.

I travel around the state now and then and may be able to meet someone for the Precision 3420s. I'll see if maybe I can get some boxes from work that would work for shipping.