I have the following servers ready for sale. Buyer pays shipping, or local pickup in San Diego, California.
ALL SERVERS have fully updated FIRMWAREs and BIOS. That should save you a few hours of prep time. Also, all servers include iDRAC7 enterprise license.
Here are the specs:
unit #3: ($300 + shipping)
- 2x Xeon E5-2640 (6-core/12-thread 2.5Ghz per CPU) - upgradable to v2 Ivy Bridge-EP
- 64GB DDR3 ECC 1333 RAM (8x8GB R-DIMMs in full quad channel setup)
- 8x 2.5" SFF hard drive bays (no trays included, all bays have blank fillers)
- Storage controller: H710 (in either RAID or IT mode; see below)
- 4-port Broadcom 1Gb NIC onboard
- 2x 750W Platinum PSUs
- Front bezel included
STORAGE CONTROLLER OPTIONS. Choose between:
A) Dell PERC H710 mini monolithic cross-flashed to LSI 2308 IT mode firmware. (YES, this is in IT mode, ready for ZFS / FreeNAS / unraid / etc.) - Add $30 for this option.
B) Dell PERC H710 mini monolithic with latest Dell RAID firmware. (this is the normal RAID controller)
RACKMOUNT RAILS:
I have the original Dell rapid rail kits for the R620 available. Add $50 if you want the rail kit.
If you're seriously interested, please feel free ask questions. If your question might benefit others, please post in this thread, otherwise send me a PM for your questions. Thanks!
Cooler Master Cosmos II (2) front bezel panel BRAND NEW
I got this as RMA replacement for my Cosmos II case from Cooler Master because one of the magnets fell off my front panel door. I would have been fine with just the front door, but they sent me the entire front panel. Ironically, the replacement they sent me also had the same exact problem, the right side magnet on the front door fell out! So, instead of taking my case apart, i just used some hot-glue and reattached the magnet.. which so far so good. I did the same with this replacement that Cooler Master sent me. It's just been sitting in my office collecting dust, so I dusted it off and want to see if anyone here wants it? Maybe for a case mod project for the Cosmos II case? $40 + shipping or local pickup.
Payment via Zelle or Google Wallet. Thanks!
ALL SERVERS have fully updated FIRMWAREs and BIOS. That should save you a few hours of prep time. Also, all servers include iDRAC7 enterprise license.
Here are the specs:
unit #3: ($300 + shipping)
- 2x Xeon E5-2640 (6-core/12-thread 2.5Ghz per CPU) - upgradable to v2 Ivy Bridge-EP
- 64GB DDR3 ECC 1333 RAM (8x8GB R-DIMMs in full quad channel setup)
- 8x 2.5" SFF hard drive bays (no trays included, all bays have blank fillers)
- Storage controller: H710 (in either RAID or IT mode; see below)
- 4-port Broadcom 1Gb NIC onboard
- 2x 750W Platinum PSUs
- Front bezel included
STORAGE CONTROLLER OPTIONS. Choose between:
A) Dell PERC H710 mini monolithic cross-flashed to LSI 2308 IT mode firmware. (YES, this is in IT mode, ready for ZFS / FreeNAS / unraid / etc.) - Add $30 for this option.
B) Dell PERC H710 mini monolithic with latest Dell RAID firmware. (this is the normal RAID controller)
RACKMOUNT RAILS:
I have the original Dell rapid rail kits for the R620 available. Add $50 if you want the rail kit.
If you're seriously interested, please feel free ask questions. If your question might benefit others, please post in this thread, otherwise send me a PM for your questions. Thanks!
Cooler Master Cosmos II (2) front bezel panel BRAND NEW
I got this as RMA replacement for my Cosmos II case from Cooler Master because one of the magnets fell off my front panel door. I would have been fine with just the front door, but they sent me the entire front panel. Ironically, the replacement they sent me also had the same exact problem, the right side magnet on the front door fell out! So, instead of taking my case apart, i just used some hot-glue and reattached the magnet.. which so far so good. I did the same with this replacement that Cooler Master sent me. It's just been sitting in my office collecting dust, so I dusted it off and want to see if anyone here wants it? Maybe for a case mod project for the Cosmos II case? $40 + shipping or local pickup.
Payment via Zelle or Google Wallet. Thanks!
Last edited: