FS: Dell DCS C1100

[PersonalJ]

I have a Dell DCS C1100 I removed from colo in working order.

It has dual L5630 CPUs, (18 x 4gb) 72GB Registered DDR3 (PC3-8500R), 4 3.5" drive caddies, and a rail kit.

I would like $535 + shipping OBO and accept PayPal or money orders.

http://www.rackrealm.com/stuffz/C1100/DSC_0029.JPG
http://www.rackrealm.com/stuffz/C1100/DSC_0030.JPG
http://www.rackrealm.com/stuffz/C1100/DSC_0031.JPG
http://www.rackrealm.com/stuffz/C1100/DSC_0032.JPG
http://www.rackrealm.com/stuffz/C1100/DSC_0033.JPG
http://www.rackrealm.com/stuffz/C1100/DSC_0035.JPG

PersonalJ | HeatWare.com

 

[PersonalJ]

I've uploaded photos.

 

[ItsChrisG]

Did you ever measure power draw during bootup, idling, and some normal load (webserver type stuff)?

 

[PersonalJ]

Did you ever measure power draw during bootup, idling, and some normal load (webserver type stuff)?

It would just hit 2 Amps @ 120v on cold boot with dual L5520s and two mechanical HDDs but would pull less than 2 amps @ 120v at 100% cpu load with L5520s. It should be sub 2 amps @ 120v at cold boot with the L5630s but I can give you an exact measurement later today.

I have L5520s, L5630s, L5640s, and E5620s if you wanted the server to be reconfigured a bit.

 

[PersonalJ]

I dropped the price, I will meter the power usage soon but I have been busy.

 

[PersonalJ]

Did you ever measure power draw during bootup, idling, and some normal load (webserver type stuff)?

With two mechanical 3.5" drives I saw ~380 watts at cold boot, ~160 watts at idle, 290 watts under 16 x Dhrystone 2 using register variables UnixBench 5.13 test.

 

[PersonalJ]

Price dropped.