FS: DDR4 ECC, SSDs, SATA DOMs, Supermicro X10SL7-F, and more

[BlueFox]

USPS money orders or Google Wallet preferred as PayPal fees add up. Will also entertain trades since I like new toys and rotate through hardware regularly. I think my reputation should help: Heatware

$95 each - Samsung DDR4 16GB ECC Registered RAM. Have a bunch available. On the Supermicro HCL and Supermicro branded.

$49 each - Micron DDR4 8GB ECC Registered RAM. Have a bunch available. On the Supermicro HCL and Supermicro branded.

$329 shipped - Supermicro X10SL7-F with a Xeon E3-1220v3 and 32GB DDR3 ECC UDIMMs. IO shield included. Has an integrated LSI 2308 SAS HBA.

$149 each - QLogic QLE3442-RJ dual 10GBe NIC.

$70 shipped - Sold -Samsung 850 EVO 500GB SSD.

$40 shipped - Sold - Samsung 840 250GB SSD.

$39 each - Sold - Supermicro 32GB SATA DOM.

$249 shipped - Sold - Supermicro 5018A-TN4. Comes with an extra fan to cool an expansion card. Pictured RAM not included.

$109 shipped per pair - All sold - 8GB DDR4 Crucial Ballistix Sport.

 

[macrules34]

Whats the noise level on the Supermicro 5018A-TN4? Does this board have a SATA DOM port? Looks like a good box for pfSense.

 

[BlueFox]

Whats the noise level on the Supermicro 5018A-TN4? Does this board have a SATA DOM port? Looks like a good box for pfSense.

It's quite quiet thanks to the CPU TDP being only 20W. If you don't need the second fan, you can disconnect it too. There is a header to power a single SATA DOM, so yes, they're supported.

 

[macrules34]

Does it have 4 GB ethernet ports and an IPMI port? What did you use this box for?

 

[BlueFox]

Does it have 4 GB ethernet ports and an IPMI port? What did you use this box for?

Yep, 4 x 1GBe and a 5th dedicated IPMI port. I think like most people, it was used for pfSense. Also used these for low power VM hosts since most of what I run at home sits idle the majority of the time.

 

[common]

Has the board of the Supermicro 5018A-TN4 been RMA'd for the Atom C2000 bug? What memory model (ECC?)? Thanks!

 

[BlueFox]

Has the board of the Supermicro 5018A-TN4 been RMA'd for the Atom C2000 bug? What memory model (ECC?)? Thanks!

I have not RMAed it. The board actually only supports ECC RAM so far as I'm aware. They're Kingston 1600MHz DIMMs. I can get you the exact model if you want when I'm home from work.

 

[macrules34]

@BlueFox do you have to be the original owner/buyer to have the board RMAed? Is this one still under warranty to have it RMAed?

 

[T_Minus]

@BlueFox do you have to be the original owner/buyer to have the board RMAed? Is this one still under warranty to have it RMAed?

No, you don't.

A lot of us on here bought some other models on ebay and we all RMAd them without issue

 

[PnoT]

@BlueFox do you have to be the original owner/buyer to have the board RMAed? Is this one still under warranty to have it RMAed?

No, you don't.

A lot of us on here bought some other models on ebay and we all RMAd them without issue

I can say without a doubt what T_Minus is saying holds true. 5 boards bought from eBay over the last 3 months have went back for a FREE fix minus the shipping paid to get the motherboard back to SM. They usually turn them over in 2-4 days as well.

 

[BlueFox]

Still available!

 

[BlueFox]

Prices dropped a bit.

 

[BlueFox]

Price dropped again.

 

[BlueFox]

Prices dropped.

 

[BlueFox]

Prices dropped again.

 

[BlueFox]

Added a few things.

 

[BlueFox]

Still available!

 

[shanehm2]

How many 16gb dims you got and will you ship to Australia

 

[BlueFox]

Prices dropped.

 

[BlueFox]

Sold a couple things and added a few more.