FS: Aquantia 10G NICs and SPF+ to 10GBe

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

Kev

Active Member
Feb 16, 2015
461
111
43
41
I have the following:

3 x AQN-107 10GBe network cards: $30 each
0 x AQS-107 802.3bz/NBase-T SFP+ Transceiver: $100 each

Shipping of $7 to anywhere in the US.
 
Last edited:
  • Like
Reactions: Samir and muhfugen

Kev

Active Member
Feb 16, 2015
461
111
43
41
AQS-107 was verified to work with my Cisco SG500x SFP+ port connected to a Netgear XS716E 10GBe port. Cool!
 

muhfugen

Active Member
Dec 5, 2016
156
45
28
I've seen different pictures for the AQS-107 so i 'm not sure how large they are. Do they have a problem fitting other SFP+ modules in adjacent slots such as in the pic below, or are they wide enough to interfere? The SPF+ ports on your Cisco SG500x seem to have a good bit of space between them. Could you post a picture or two of them, and measure how wide they are at the RJ45 jack? Assuming there isnt a problem with this I would take both. What payment methods do you accept?

 

Kev

Active Member
Feb 16, 2015
461
111
43
41
I just checked and the jack is flush with the side of the SFP+ port. I see no reason why the above port configuration would not work.
 

Attachments

muhfugen

Active Member
Dec 5, 2016
156
45
28
Thanks. I'll take both of the AQS-107, PM me with payment details please and i'll send the money.
 

muhfugen

Active Member
Dec 5, 2016
156
45
28
I received the AQS-107, they both appear to work, I would recommend doing business with Kev.
 
Last edited:

acquacow

Well-Known Member
Feb 15, 2017
786
439
63
42
3 for $30ea, all RJ45, right?

I'll grab them.

Now I can fully populate my 10gig switch =P
 

Kev

Active Member
Feb 16, 2015
461
111
43
41
Yes $30/each. $90 for all three. All single RJ45 2.5/5/10G.