EU FS: 35x Hynix 16gb PC3-14900R 1866MHz DDR3 ECC RAM Memory

[tesla100]

Hi there,

I have 35x Hynix 16gb DDR3 ECC 1866MHz memory modules, all memtested, asking price is 40EUR/module.

Shipping via SEUR or TNT should be around 20-40 EUR in the EU depending on your location (with insurance). Will ship worldwide, ask for a quote...

Buyer pays shipping and any associated fees (Paypal, customs, etc)...

Any questions or comments, please let me know. Thanks

 

[loggedinasroot]

Nice price, from where in the EU are you shipping? Might have to get a couple of these.

 

[tesla100]

Spain

 

[tesla100]

More RAM added...

 

[tesla100]

Price lowered...

 

[tesla100]

bump

 

[gigatexal]

Bulk discounts available?

 

[tesla100]

Definitely

 

[Erlipton]

quote for (4x) Hynix 16gb DDR3 ECC 1866MHz shipped to USA, California, 95125?

 

[tesla100]

PM sent..

 

[golfatx]

Can you or someone confirm any of this RAM will be compatible with my board? It's an Intel S2600CP . If compatible, I'll be happy to take 16 sticks off your hands.
I can't determine by reading the manual that this RAM could work. Another set of eyes would greatly be appreciated. Link to the manual is Table 5. Rdimm Support; Table 6. Lrdimm Support - Intel S2600CP Family Technical Product Specification [Page 50]

 

[tesla100]

Can you or someone confirm any of this RAM will be compatible with my board? It's an Intel S2600CP . If compatible, I'll be happy to take 16 sticks off your hands.
I can't determine by reading the manual that this RAM could work. Another set of eyes would greatly be appreciated. Link to the manual is Table 5. Rdimm Support; Table 6. Lrdimm Support - Intel S2600CP Family Technical Product Specification [Page 50]

They should work in your motherboard... Where are you located?

 

[golfatx]

They should work in your motherboard... Where are you located?

USA 78701

 

[muthur6k]

Hi, I have a supermicro X8DTI motherboard (my thread), but I'm not sure if these will fit.
I'm also unsure how DDR3 1.35V-1600 differs from DDR3 1600.

From the manual I can only find 1333 support with 5600 cpu installed (I have 5620).
Here's the link for my board, can you our someone smarter than me see if these fit?
Super Micro Computer, Inc. | Support | Resources


If they fit, can I get a quote for 6 or 12 to Norway?

 

[tesla100]

USA 78701

Well, in that case, I prefer to wait till you or somebody else confirms that they are compatible.. I don't want to risk paying the postage overseas both ways if they are not...

 

[tesla100]

Hi, I have a supermicro X8DTI motherboard (my thread), but I'm not sure if these will fit.
I'm also unsure how DDR3 1.35V-1600 differs from DDR3 1600.

From the manual I can only find 1333 support with 5600 cpu installed (I have 5620).
Here's the link for my board, can you our someone smarter than me see if these fit?
Super Micro Computer, Inc. | Support | Resources


If they fit, can I get a quote for 6 or 12 to Norway?

PM sent...

 

[dreamsin]

No chance of ECC udimms?

 

[tesla100]

Unfortunately not..

 

[golfatx]

@tesla100 PM'd

 

[tesla100]

bumpp