Dear at all,
i bought some mellanox branded hp cards.
I need to install here the latest mellanox drivers .
Read in this forum that here are some specialists to solve this kind of problem with flashing.
I already tried to do that with mlxup.
i get follow response
./mlxup -online
Querying Mellanox devices firmware ...
Device #1:
----------
Device Type: ConnectX5
Part Number: N/A
Description:
PSID: HPE0000000009
PCI Device Name: 0000:41:00.0
Base GUID: b88303ffff7c1e30
Base MAC: b883037c1e30
Versions: Current Available
FW 16.23.1020 N/A
PXE 3.5.0504 N/A
UEFI 14.16.0017 N/A
Status: No matching image found
_____________________________________
41:00.0 Infiniband controller: Mellanox Technologies MT27800 Family [ConnectX-5]
Subsystem: Hewlett Packard Enterprise MT27800 Family [ConnectX-5]
41:00.1 Infiniband controller: Mellanox Technologies MT27800 Family [ConnectX-5]
Subsystem: Hewlett Packard Enterprise MT27800 Family [ConnectX-5]
_____________________________________
then i have read that is important to falsh the the card to use the regulary firmware.
But i have absolutely no idea how to do that.
I found the mft tools from mellanox.
But what i must to do the correct flash?
I found on that website a oem matching table it says that
872726-B21 is MCX556A-ECAT
This means i must use this firmware if i am right?!
PSID: MT_0000000008
best regards
i bought some mellanox branded hp cards.
I need to install here the latest mellanox drivers .
Read in this forum that here are some specialists to solve this kind of problem with flashing.
I already tried to do that with mlxup.
i get follow response
./mlxup -online
Querying Mellanox devices firmware ...
Device #1:
----------
Device Type: ConnectX5
Part Number: N/A
Description:
PSID: HPE0000000009
PCI Device Name: 0000:41:00.0
Base GUID: b88303ffff7c1e30
Base MAC: b883037c1e30
Versions: Current Available
FW 16.23.1020 N/A
PXE 3.5.0504 N/A
UEFI 14.16.0017 N/A
Status: No matching image found
_____________________________________
41:00.0 Infiniband controller: Mellanox Technologies MT27800 Family [ConnectX-5]
Subsystem: Hewlett Packard Enterprise MT27800 Family [ConnectX-5]
41:00.1 Infiniband controller: Mellanox Technologies MT27800 Family [ConnectX-5]
Subsystem: Hewlett Packard Enterprise MT27800 Family [ConnectX-5]
_____________________________________
then i have read that is important to falsh the the card to use the regulary firmware.
But i have absolutely no idea how to do that.
I found the mft tools from mellanox.
But what i must to do the correct flash?
I found on that website a oem matching table it says that
872726-B21 is MCX556A-ECAT
This means i must use this firmware if i am right?!
Firmware for ConnectX®-5 VPI
Updating Firmware for ConnectX®-5 VPI PCI Express Adapter Cards (InfiniBand, Ethernet, VPI)
www.mellanox.com
best regards
Last edited: