ex4200 looking for J-Web 15.1A4 or J-Web 15.1A4.1

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

saflang

New Member
Dec 27, 2018
3
0
1
I've just picked up a Juniper ex4200-48px and I was able to upgrade to 15.1R6.7 and then to 15.1R7.8.
Does anyone have 15.1R7.9 (which seems to be the latest version) and/or a copy of J-Web for any of these OS versions? I know everything can be done through CLI, but I'm new and just learning so a web interface would still help.

Namely I'm looking for J-Web 15.1A4 (for 15.1R6.7) or J-Web 15.1A4.1
which I would assume the file names would be like jweb-ex-app-15.1A4-signed.tgz or jweb-ex-app-15.1A4.1-signed.tgz

Thank you everyone,
 

saflang

New Member
Dec 27, 2018
3
0
1
I've now been able to find JUNOS 15.1R7.9 for the ex4200 (latest version) but I've still had no luck in finding Jweb 15.1A4.1
I believe it's located at h**ps://webdownload.juniper.net/swdl/dl/secure/site/1/record/79745.html but obviously I do not have permission to download the file.
Could someone please help me out.
Thank you
 

rshakin

New Member
Jan 15, 2019
29
6
3
Sorry to bring a dead thread, but any one have a link to the software that working?
 

saegin

New Member
Jan 14, 2019
1
0
1
I'm also looking for a copy of 15.1R7.9 and J-Web if anyone wouldn't mind sharing.

Thanks!
 

Kei-0070

Member
May 3, 2019
40
18
8
Cardiff
Hi! Does anyone have the latest firmware for the EX3300 ? Should be version 15.1R7.9 if I'm correct.

Thanks!
I assume you've probably already come across this version. Not the latest but it can't be too old.

I've got the version you seek running on my ex3300-24p but I cannot find any way of getting a copy of the system image off it. I've made a snapshot to usb but it's not the same as it partitions the pen drive with essentially a clone of the inbuilt flash.
 

Sealside

Active Member
May 10, 2019
124
42
28
Stockholm/Sweden
I assume you've probably already come across this version. Not the latest but it can't be too old.

I've got the version you seek running on my ex3300-24p but I cannot find any way of getting a copy of the system image off it. I've made a snapshot to usb but it's not the same as it partitions the pen drive with essentially a clone of the inbuilt flash.

Hi! Thanks for the reply. Yeah I'm actually running that firmware now, was hoping to get my hands on the latest one.
It's a bit strange to me that Juniper has no interested in keeping their hardware up to date, even without license agreement.
Anyways seems like a great switch overall impression is great so far.

Regards S.
 

747builder

Active Member
Dec 17, 2017
112
58
28
Hi! Thanks for the reply. Yeah I'm actually running that firmware now, was hoping to get my hands on the latest one.
It's a bit strange to me that Juniper has no interested in keeping their hardware up to date, even without license agreement.
Anyways seems like a great switch overall impression is great so far.

Regards S.
google the filename and alot of times you can find a place to download it, just make sure the sha matches junipers.
 
Last edited:
  • Like
Reactions: klui and Sealside

AFG

New Member
Sep 22, 2019
4
0
1
Hello Everyone,

Hopefully this is the right forum. I'm looking for the latest version Junos OS for a EX3300, can someone share please? Let me know. Thanks!
 

747builder

Active Member
Dec 17, 2017
112
58
28
Hello Everyone,

Hopefully this is the right forum. I'm looking for the latest version Junos OS for a EX3300, can someone share please? Let me know. Thanks!
google the filename and alot of times you can find it to download on the internet.
 
Last edited:
  • Like
Reactions: finktunes

briske

New Member
Jan 27, 2020
1
0
1
Is there any chance I can grab a copy as well? Just got my EX3300 but it came with 11.4R5.5. I think I may need an earlier version to start with (12.3 or 14.1?) before I can go up to 15.1, as I read Juniper only supports a 3 major version jump.
 

747builder

Active Member
Dec 17, 2017
112
58
28
Is there any chance I can grab a copy as well? Just got my EX3300 but it came with 11.4R5.5. I think I may need an earlier version to start with (12.3 or 14.1?) before I can go up to 15.1, as I read Juniper only supports a 3 major version jump.
google the filename and alot of time you can find it.
 
Last edited:

bugmenot

Member
Aug 14, 2017
56
17
8
Hey, does anyone know why the J-Web Application Package 15.1A4.1 is not available on Juniper Software Download?

Thanks!