I flashed a perc-310 to lsi 9211 IT Mode with the intention of passing it through to a Linux vm, so I can utilise some existing ext4 disks I'll be pulling from an old Gen 7 HP Microserver. It's in a tower case at home so not the kind of cooling these cards would get in a datacenter, but I have attached a 40mm fan. If I install the megaraid utilities on the vm, would I get access to the hba temps? Or do I need to find a way of monitoring from esxi? If relevant, it's an am4 x-470 motherboard, not a server board (budget...).