i am not talking about (bad) ES.So not all motherboards support them. There must be guide or something to show if the motherboard will accept them?
why should a E5-2695 v4 production unit not work ? QS is same except one bit(ES bit is set)There must be guide or something to show if the motherboard will accept them?
It was ES not QS that I triedwhy should a E5-2695 v4 production unit not work ? QS is same except one bit(ES bit is set)
ES says nothing. ES0,ES1,ES2 ? some ES2 work, some not. just a different BIOS and the ESx stops working.It was ES not QS that I tried
if the matching production unit works, yes. QS and PRD share same steppingµcode.Do QS ones work on any motherboard?
to be clear ! even QS/PRD V4 don't work with old BIOS !I will try to stick to QS or the normal ones
unfortunaly not:Then I found this model: PXE1610CDN described in manual which is available on the Asus C621E-SAGE.
On infineon site I found information that PXE1610 can be programmed by PowIRCenter:
this CPU is stepping A0 cpuid 50655I am trying to upgrade an HP Z6 G4 workstation with a QQ8M CPU
Not what I was hoping to hear, but thank you for your reply.
downgrade to 2.21 ?Not what I was hoping to hear, but thank you for your reply.
Scouring the internet for the 2.21 bios as we speak. However, having owned a lot of HP gear, I am not particularly confident that a bios downgrade will be possible.downgrade to 2.21 ?
I have the bios 2.21, I can send it to you.Thanks tesla100 and RolloZ170 for your help. I will let you know how it goes.
QQ8M is 2ng gen scalable. this board has old BIOS thought.And how well would a single or dual Intel Xeon Gold 5218 ES QQ8M CPUs work in this motherboard, in a server application? Will virtualization work fine with QQ8M?
Yes it's second gen. What do you mean the board has old BIOS? Project Olympus supports second gen as well?QQ8M is 2ng gen scalable. this board has old BIOS thought.