I am not able to uses IPMIUtil to ultimately control and set the fan speed on the HSF to stop the ramping Up/Down using this link from traderjay
Right now I have just the Fan on the HSF Connected no other fans connected ATM. that's the one ramping up and down.
When I try IPMIUtil I get ipmilan error resolving hostname
However, I can connect via IPMIView using that IP Address. I can also ping the IPMI IP address too. Any thoughts?
How To: Change IPMI Sensor Thresholds using ipmiutil
Many server motherboards, including the Supermicro X10 series, have their fans monitored by the BMC, which automatically attempts to recover stalling (of the motor, not in the aerodynamic sense) fans by spinning them up to maximum (PWM set to...
www.ixsystems.com
Right now I have just the Fan on the HSF Connected no other fans connected ATM. that's the one ramping up and down.
When I try IPMIUtil I get ipmilan error resolving hostname
However, I can connect via IPMIView using that IP Address. I can also ping the IPMI IP address too. Any thoughts?