Epyc 9d64 CPU support
- Thread starter CyberArtem85
- Start date
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
my like is for your report, i don't like it is not working
I am very happy to report back with very happy news to bring:my like is for your report, i don't like it is not working
- No color: not tested
- RED: Does not work
- Yellow: Does not work - needs more testing
- GREEN: Does work
Asus K14PA-U12
I ended up buying an 9D64 and paired it up with an H14-SSL-NT motherboard and 2 sticks of RAM. Here are my findings so far:
BIOS showed this CPU has no L3 cache but lscpu shows 176MB,
The CPU runs cool because the base frequency is 1 GHz and it doesn't boost very high.
Processor family is 19H.
I ran stress-ng on all cores for an hour and it handled it with ease and temps on my AIO didn't rise that much.
A general stress-ng caused an immediate freeze.
Neither of the 2 M.2 slots worked.
PCIe slots 1 and 3 - both Gen 5 x16 slots worked.
Here's lscpu output:
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Address sizes: 52 bits physical, 57 bits virtual
Byte Order: Little Endian
CPU(s): 176
On-line CPU(s) list: 0-175
Vendor ID: AuthenticAMD
Model name: AMD EPYC 9D64 88-Core Processor
CPU family: 25
Model: 160
Thread(s) per core: 2
Core(s) per socket: 88
Socket(s): 1
Stepping: 1
Frequency boost: enabled
CPU(s) scaling MHz: 34%
CPU max MHz: 2973.1780
CPU min MHz: 1000.0000
BogoMIPS: 2396.44
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fx
sr_opt pdpe1gb rdtscp lm constant_tsc rep_good amd_lbr_v2 nopl xtopology nonstop_tsc cpuid extd_apicid aperfmperf rapl pn
i pclmulqdq monitor ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy sv
m extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext pe
rfctr_llc mwaitx cpuid_fault cpb cat_l3 cdp_l3 hw_pstate ssbd mba perfmon_v2 ibrs ibpb stibp ibrs_enhanced vmmcall fsgsba
se bmi1 avx2 smep bmi2 erms invpcid cqm rdt_a avx512f avx512dq rdseed adx smap avx512ifma clflushopt clwb avx512cd sha_ni
avx512bw avx512vl xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local user_shstk avx512_bf1
6 clzero irperf xsaveerptr rdpru wbnoinvd amd_ppin cppc arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid
decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif x2avic v_spec_ctrl vnmi avx512vbmi umip pku ospke avx512
_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg avx512_vpopcntdq la57 rdpid overflow_recov succor smca fsrm flush_l
1d debug_swap
Virtualization features:
Virtualization: AMD-V
Caches (sum of all):
L1d: 2.8 MiB (88 instances)
L1i: 2.8 MiB (88 instances)
L2: 88 MiB (88 instances)
L3: 176 MiB (11 instances)
NUMA:
NUMA node(s): 1
NUMA node0 CPU(s): 0-175
Vulnerabilities:
Gather data sampling: Not affected
Ghostwrite: Not affected
Indirect target selection: Not affected
Itlb multihit: Not affected
L1tf: Not affected
Mds: Not affected
Meltdown: Not affected
Mmio stale data: Not affected
Old microcode: Not affected
Reg file data sampling: Not affected
Retbleed: Not affected
Spec rstack overflow: Mitigation; Safe RET
Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl
Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization
Spectre v2: Mitigation; Enhanced / Automatic IBRS; IBPB conditional; STIBP always-on; PBRSB-eIBRS Not affected; BHI Not affected
Srbds: Not affected
Tsa: Vulnerable: No microcode
Tsx async abort: Not affected
Vmscape: Mitigation; IBPB before exit to userspace
BIOS showed this CPU has no L3 cache but lscpu shows 176MB,
The CPU runs cool because the base frequency is 1 GHz and it doesn't boost very high.
Processor family is 19H.
I ran stress-ng on all cores for an hour and it handled it with ease and temps on my AIO didn't rise that much.
A general stress-ng caused an immediate freeze.
Neither of the 2 M.2 slots worked.
PCIe slots 1 and 3 - both Gen 5 x16 slots worked.
Here's lscpu output:
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Address sizes: 52 bits physical, 57 bits virtual
Byte Order: Little Endian
CPU(s): 176
On-line CPU(s) list: 0-175
Vendor ID: AuthenticAMD
Model name: AMD EPYC 9D64 88-Core Processor
CPU family: 25
Model: 160
Thread(s) per core: 2
Core(s) per socket: 88
Socket(s): 1
Stepping: 1
Frequency boost: enabled
CPU(s) scaling MHz: 34%
CPU max MHz: 2973.1780
CPU min MHz: 1000.0000
BogoMIPS: 2396.44
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fx
sr_opt pdpe1gb rdtscp lm constant_tsc rep_good amd_lbr_v2 nopl xtopology nonstop_tsc cpuid extd_apicid aperfmperf rapl pn
i pclmulqdq monitor ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy sv
m extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext pe
rfctr_llc mwaitx cpuid_fault cpb cat_l3 cdp_l3 hw_pstate ssbd mba perfmon_v2 ibrs ibpb stibp ibrs_enhanced vmmcall fsgsba
se bmi1 avx2 smep bmi2 erms invpcid cqm rdt_a avx512f avx512dq rdseed adx smap avx512ifma clflushopt clwb avx512cd sha_ni
avx512bw avx512vl xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local user_shstk avx512_bf1
6 clzero irperf xsaveerptr rdpru wbnoinvd amd_ppin cppc arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid
decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif x2avic v_spec_ctrl vnmi avx512vbmi umip pku ospke avx512
_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg avx512_vpopcntdq la57 rdpid overflow_recov succor smca fsrm flush_l
1d debug_swap
Virtualization features:
Virtualization: AMD-V
Caches (sum of all):
L1d: 2.8 MiB (88 instances)
L1i: 2.8 MiB (88 instances)
L2: 88 MiB (88 instances)
L3: 176 MiB (11 instances)
NUMA:
NUMA node(s): 1
NUMA node0 CPU(s): 0-175
Vulnerabilities:
Gather data sampling: Not affected
Ghostwrite: Not affected
Indirect target selection: Not affected
Itlb multihit: Not affected
L1tf: Not affected
Mds: Not affected
Meltdown: Not affected
Mmio stale data: Not affected
Old microcode: Not affected
Reg file data sampling: Not affected
Retbleed: Not affected
Spec rstack overflow: Mitigation; Safe RET
Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl
Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization
Spectre v2: Mitigation; Enhanced / Automatic IBRS; IBPB conditional; STIBP always-on; PBRSB-eIBRS Not affected; BHI Not affected
Srbds: Not affected
Tsa: Vulnerable: No microcode
Tsx async abort: Not affected
Vmscape: Mitigation; IBPB before exit to userspace
Last edited:
@benobolol @Egon @ssan @Zero_0 @CyberArtem85 @Mayhem Labs : Just checking if anyone has experimented more with the 9D64. I'm wondering if going down the 2P route to get more lanes is worth the cost or not.
so far none of the 'D' support dual socket, PCIe lanes act as bridge CPU2CPU in 2P mode.
I have a few more updates re: 9D64 and the Supermicro H14SSL-NT.
- It supports only 8 memory channels. Channels D1, F1, L1 and J1 don't work.
- The 2 10G ethernet ports work
- None of the onboard SATA ports worked
- MCIO ports 1 and 2 didn't work, but I also haven't tried using those cables elsewhere to eliminate any fault of the cables
- MCIO3 also didn't work either in NVME or SATA mode
OK, so it seems that the following PCIe ports do work - but not always: G0, G2, P0, P2 (gen5) and P4 (gen3). G1/G3/P1/P3 don't seem to work, whether P5 (4xgen3) works or not is unknown.
The question is: Was the problem with G0 and P0 some of you experienced just a matter of a faulty cable or is it unpredictable and with different exemplars of 9D64 different ports do and don't work... ?
None of the ports works as SATA.
The question is: Was the problem with G0 and P0 some of you experienced just a matter of a faulty cable or is it unpredictable and with different exemplars of 9D64 different ports do and don't work... ?
None of the ports works as SATA.
Any news about the PCIe x16 slots?
Theoretically, based on other reports here in the forum, PCIE2 (which corrsponds to the P2 port of the CPU) should/might work while PCIE1/PCIE3 (P1/P3) do not.
I can try next week with a non pcie gen5 piece
GPU did not work but i didnt mess with gen settings