Enabling SR-IOV on an HP DL380P G8 makes it "red screen"

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

thetoad

Active Member
Feb 10, 2021
236
102
28
that wasn't the case here. I'm close to 100% positive it was the CX3 firmware. (heck this second machine has 768GB of ram, so takes an age and a half to boot. small flex, but for machines like this, the bios really needs to beep when it comes time to hit a key to enter the bios, as hard to pay attention for so long waiting for it to get through the mem test)