Hey,
I have a Supermicro X11 DPH-T motherboard with 2 Intel ES cpus installed.
If I install only one cpu in this board it is perfectly stable.
But if i Install a cpu in the CPU2 socket then i get random bluescreens and restarts.
The bluescreen errors are written as "whea uncorrectable error".
I have tried both cpus in socket 1 only and it is stable. But if i install a cpu in socket2 i get bluescreens.
I looked at the socket i don't see bent pins but i could be wrong.
I have a 2nd workstation with the same board and cpus and that is working completely stable.
I think its something wrong with that socket or could it be a bios setting or something?
Any ideas from the community?
I have a Supermicro X11 DPH-T motherboard with 2 Intel ES cpus installed.
If I install only one cpu in this board it is perfectly stable.
But if i Install a cpu in the CPU2 socket then i get random bluescreens and restarts.
The bluescreen errors are written as "whea uncorrectable error".
I have tried both cpus in socket 1 only and it is stable. But if i install a cpu in socket2 i get bluescreens.
I looked at the socket i don't see bent pins but i could be wrong.
I have a 2nd workstation with the same board and cpus and that is working completely stable.
I think its something wrong with that socket or could it be a bios setting or something?
Any ideas from the community?