Desperate search for Arista EOS firmware

[larsstig]

Hi, does someone have 4.28.13.1M? I have a 7010T that is on 4.26.8M.
Thanks

 

[The_Never_Hawk]

Does anyone have the docker extension for EOS64? seems to be named EOS64-4.33.4M-docker.swix

 

[baladrak]

Looking for EOS-4.28.13m.swi if someone has it.

 

[iulian_ten]

Accuris Technologies Public CDN

 

[The_Never_Hawk]

EOS64-4.27.0F-docker-ce-20.10.6-3.el7.x86_64.swix is not compatible with EOS64 4.33.4M

localhost(config)#show extensions
Name Version/Release Status Extension
----------------------------------------------- -------------------- ----------- ---------
EOS64-4.27.0F-docker-ce-20.10.6-3.el7.x86\ 20.10.6/3.el7 A 9
_64.swix


A: available | NA: not available | I: installed | F: forced | B: install at boot
S: valid signature | NS: invalid signature
The extensions are stored on internal flash (flash
localhost(config)#extension EOS64-4.27.0F-docker-ce-20.10.6-3.el7.x86_64.swix
% Error installing EOS64-4.27.0F-docker-ce-20.10.6-3.el7.x86_64.swix: SWIX install error: Transaction check failed: libseccomp >= 2.5 is needed by (installed) podman-4:5.2.2-9.el9_5.x86_64
fuse3-libs = 3.10.2-8.el9 is needed by (installed) fuse3-3.10.2-8.el9.x86_64
libcgroup is needed by docker-ce-3:20.10.6-3.el7.x86_64

 

[The_Never_Hawk]

SSD + RAM upgrade working as intended on Arista DCS-7050TX3-48C8-R. All 64GB detected & ECC is reported working

RAM: SK Hynix 32GB 2Rx8 DDR4-3200 ECC UDIMM HMAA4GU7CJR8N
SSD: Micron 5400 PRO 480GB M.2 SATA

[admin@localhost ~]$ dmesg | grep -i edac
[    0.556313] EDAC MC: Ver: 3.0.0
[   11.064026] amd64_edac_mod loaded by systemd-udevd:1245 < systemd-udevd:1210 < systemd:1 < swapper/0:0
[   11.064035] EDAC amd64: F15h_M60h detected (node 0).
[   11.064089] EDAC amd64: Node 0: DRAM ECC enabled.
[   11.064090] EDAC amd64: MCT channel count: 2
[   11.064153] EDAC MC0: Giving out device to module amd64_edac controller F15h_M60h: DEV 0000:00:18.3 (INTERRUPT)
[   11.064155] EDAC MC: DCT0 chip selects:
[   11.064156] EDAC amd64: MC: 0: 16384MB 1: 16384MB
[   11.064157] EDAC amd64: MC: 2:     0MB 3:     0MB
[   11.064158] EDAC amd64: MC: 4:     0MB 5:     0MB
[   11.064159] EDAC amd64: MC: 6:     0MB 7:     0MB
[   11.064160] EDAC MC: DCT1 chip selects:
[   11.064161] EDAC amd64: MC: 0: 16384MB 1: 16384MB
[   11.064162] EDAC amd64: MC: 2:     0MB 3:     0MB
[   11.064162] EDAC amd64: MC: 4:     0MB 5:     0MB
[   11.064163] EDAC amd64: MC: 6:     0MB 7:     0MB
[   11.064164] EDAC amd64: using x4 syndromes.
[   11.064176] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[   11.064177] AMD64 EDAC driver v3.5.0

Photos:

http://imgur.com/a/Kx24cOK

SSD Standoff:
7050TX3 ssd stand by CrimsonHawk | Download free STL model | Printables.com

 

[frantathefranta]

SSD + RAM upgrade working as intended on Arista DCS-7050TX3-48C8-R. All 64GB detected & ECC is reported working

RAM: SK Hynix 32GB 2Rx8 DDR4-3200 ECC UDIMM HMAA4GU7CJR8N
SSD: Micron 5400 PRO 480GB M.2 SATA
…

Apologies for offtopic but I’m intrigued why someone would do this?

 

[AkelaPhreak]

Hi everyone,

I recently purchased two Arista 7050QX-32 switches and I'm looking to update them with the latest supported firmware. I understand that newer EOS versions (4.25 and above) no longer support this platform and that I’ll need the EOS-2GB variant, ideally from the 4.24 release train.

Can anyone point me to the correct download for the most recent compatible firmware?

Thanks in advance!

 

[Gummihupe]

Hi all,

I have a refurbished 7050TX-64 with EOS 4.20.12M and Aboot 4.0.7-13599834, both pretty outdated. Somehow the refurbishing company managed as well to only get it bootable in i386, I only was able to configure the Mgmt1 Port to at least get that information.

Can someone supply me with a recent Aboot and EOS for the switch no longer being an expensive brick?

Thanks very much in advance!

 

[Scott Laird]

I suspect that https://forums.servethehome.com/index.php?threads/roll-back-sonic-to-eos-on-arista-7050qx-32.18078/ will help.

 

[Scott Laird]

The link in #524 (above) should have EOS images that will work. I'm not sure about aboot off the top of my head.

 

[Rigor_M]

Would it be possible to get the 4.23.13M-2GB version ? the link in #524 only has the normal version. It wont fit on my 7150s-64 (2GB only)

 

[Rigor_M]

Would it be possible to get the 4.23.13M-2GB version ? the link in #524 only has the normal version. It wont fit on my 7150s-64 (2GB only)

Sorry, found the 2GB version, you need to go UP a folder and there's a -2GB one

Thanks

 

[freed]

We also recently aquired a set of Aristas and saw that we needed to upgrade firmware on the one switch to match our latest version we have.
DCS-7050SX-64, EOS-4.28.0F (Oudated) DCS-7050SX-64, EOS-4.28.10.1M (latest Version)

is there perhaps anyone that can assist me with aquiring the EOS-4.28.10.1M Version to apply to my Secondary Switch, It would be greatly appreciated if someone can.

 

[fohdeesha]

We also recently aquired a set of Aristas and saw that we needed to upgrade firmware on the one switch to match our latest version we have.
DCS-7050SX-64, EOS-4.28.0F (Oudated) DCS-7050SX-64, EOS-4.28.10.1M (latest Version)

is there perhaps anyone that can assist me with aquiring the EOS-4.28.10.1M Version to apply to my Secondary Switch, It would be greatly appreciated if someone can.

latest is EOS-4.28.13.1M

 

[freed]

latest is EOS-4.28.13.1M

Haha, I did mean latest to my switches haha, But thank you for that information, How does the EOL work into this, is the Hardware also considered EOL or would it be able to handle that version ?

 

[fohdeesha]

Haha, I did mean latest to my switches haha, But thank you for that information, How does the EOL work into this, is the Hardware also considered EOL or would it be able to handle that version ?

yes, EOS-4.28.13.1M is the latest for those models. u should read this thread https://forums.servethehome.com/ind...arista-eos-firmware.10480/page-14#post-412831

 

[BackupProphet]

That post should be pinned to the start of this thread.

 

[fohdeesha]

That post should be pinned to the start of this thread.

the OP was last active half a decade ago so I don't think I see it happening

 

[i386]

Time for an all Arista mega thread?