Desperate search for Arista EOS firmware
- Thread starter ItsValium
- Start date
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
Just grabbed a DCS-7050S-52 and looking for EOS 4.18.11M if someone has it, unless someone has any alternatives they are familiar with. Thanks in advance
WeTransfer | Send Large Files Fast
The simple, quick and secure way to send your files around the world without an account. Share your files, photos, and videos today for free.
WeTransfer | Send Large Files Fast
The simple, quick and secure way to send your files around the world without an account. Share your files, photos, and videos today for free.
WeTransfer | Send Large Files Fast
The simple, quick and secure way to send your files around the world without an account. Share your files, photos, and videos today for free.
Sadly I only have CV CVP, not sure that is usable for WiFi.
Links only work for 3 days, hurry up and download guys
Last edited:
I found a newer version of the 32-bit. This should be the latest and last update for the 7050 line.
WeTransfer | Send Large Files Fast
The simple, quick and secure way to send your files around the world without an account. Share your files, photos, and videos today for free.
And again the 64-bit in case you like that better:
WeTransfer | Send Large Files Fast
The simple, quick and secure way to send your files around the world without an account. Share your files, photos, and videos today for free.
Only 3 days...
This time I would appreciate it, if people who download it left a thanks as a minimum. Last post had 20+ downloads, yet only one liked it
I was digging deep into the servers of neverland, and have found the requested file:
WeTransfer | Send Large Files Fast
The simple, quick and secure way to send your files around the world without an account. Share your files, photos, and videos today for free.
Thank you for the appreciation
looking for latest EOS (or EOS64? dunno which one works or not) for 7050TX3. Currently on 4.24.3M. I think the latest M release is 4.33.4M and the latest release of any kind is 4.34.0F, and whatever their 64 bit counterpart is. I heard the 64 bit one will let you run docker, switching functionality is identical. So it seems like 64 bit is a no brainer???
Last edited:
As previously written by me in answer #506 the latest for the 7050 lineup is 4.28. The links in the post still works, so if you hurry you can have the latest 32-bit. I don't know what the latest 64-bit is but the posted one is still 4.28 so it's up there.
I think you are absolutely correct there. I was going with the X / X2:
X3 doesn't seem to have any EOL notice, so it can probably run the newest version of EOS.
For you I have:
EOS-4.34.1F.swi
or
EOS64-4.34.1F.swi
Would you like to try those?
Yeah, from my googling it is indeed still in active support. I believe F releases are liable to contain bugs. Not guaranteed, but more likely. The M releases of each version number are where they stop new feature development and switch to fixes only. there's no M release of 4.34 yet afaik. 4.33.4M is the latest M version I believe.
TLDR: I'd love to give those a try, wondering if you also got 4.33.4M and whatever the latest M release of EOS64 is
I will PM you some links for the absolute latest version of both 32 and 64 I have, along with the latest M version as well, so you can play around with it.
It's not the absolute latest versions, but they are up there.
EOS64-4.33.4M.swi confirmed booting on Arista DCS-7050TX3-48C8-R
RAM upgrade to 64GB (2x32GB) confirmed working as well. RAM used to upgrade and stock RAM attached below
M.2 M-Key slot confirmed SATA only. No NVMe. There is no mounting point or standoff installed, so can someone kindly design a 3D printed thingy to hold it in place?
Arista DCS-7050TX3-48C8-R
Hardware version: 11.20
Serial number: [REDACTED]
Hardware MAC address: [REDACTED]
System MAC address: [REDACTED]
Software image version: 4.33.4M
Architecture: x86_64
Internal build version: 4.33.4M-42444412.4334M
Internal build ID: 7929ddbc-0c94-4536-a774-167ea4b4eab8
Image format version: 3.0
Image optimization: Default
Uptime: 35 minutes
Total memory: 65734484 kB
Free memory: 62714832 kB
images:
RAM upgrade to 64GB (2x32GB) confirmed working as well. RAM used to upgrade and stock RAM attached below
M.2 M-Key slot confirmed SATA only. No NVMe. There is no mounting point or standoff installed, so can someone kindly design a 3D printed thingy to hold it in place?
Arista DCS-7050TX3-48C8-R
Hardware version: 11.20
Serial number: [REDACTED]
Hardware MAC address: [REDACTED]
System MAC address: [REDACTED]
Software image version: 4.33.4M
Architecture: x86_64
Internal build version: 4.33.4M-42444412.4334M
Internal build ID: 7929ddbc-0c94-4536-a774-167ea4b4eab8
Image format version: 3.0
Image optimization: Default
Uptime: 35 minutes
Total memory: 65734484 kB
Free memory: 62714832 kB
images:
Please tell me you didn’t rip out the ECC UDIMMs and replace them with random non-ECC consumer RAM…
Ordered ecc udimm, waiting for it to arrive. Though I highly doubt a home user would see errors significant enough to necessitate the use of ecc
Any device running 24/7 should use ECC.
If you need a 7050TX3, you also need ECC. Simple as that.
Also ignoring the fact that 64GB in a 7050TX3 is just plain nonsense...