Dell PSU error lights?

[JediAcolyte]

I have a Dell 1600w PSU (D1600E-S0) that cuts off when a load is applied. The max draw for my load should be 900-1000 watts max.
When it turns off, the plastic handle by the power plug is lit by an orange LED instead of the usual green. After that, it's a slow orange blink.

Can anyone link an error code manual or something?

http://imgur.com/a/HaCDHSD

 

[Tom5051]

It means the power supply failed a self test and you make a service request via Dell

 

[JediAcolyte]

Thanks. These are refurbs so I guess I'm just out of luck.

 

[PithyChats]

For future reference, the diagnostic light codes are described just above the wattage on the large label. Take a look, you should see it there

 

[JediAcolyte]

Thanks @PithyChats
I guess I should learn to read a bit

 

[RolloZ170]

The max draw for my load should be 900-1000 watts max.

Attention also to this !

D1600E-S0: VOLTAGE RANGE: 200-240V ( 1600W ) / 100-120V ( 800W )

too much if your country uses 120V

 

[JediAcolyte]

Thanks @RolloZ170 I'm definitely on 240v.
You plug this in with just a CPU and motherboard on it on 120v and that fan starts screaming. You know when these aren't on 240.