can one of you with a dell 8024 run a command for me? Reboot into the boot menu, and hit option 5 "Display operational code vital product data" - then pastebin the output.
I have a way to flash the Delta 7024's over to Dells without jtag (similar to the quanta > brocade flash), but need the boot CRC and size info in that command to verify I have the bootloader properly extracted from Dells giant update STK. Thanks!
Boot Menu 5.1.11.1
Options available
1 - Start operational code
2 - Change baud rate
3 - Retrieve event log using XMODEM
4 - Load new operational code using XMODEM
5 - Display operational code vital product data
6 - Abort boot code update
7 - Update boot code
8 - Delete backup image
9 - Reset the system
10 - Restore configuration to factory defaults (delete config files)
11 - Activate Backup Image
12 - Password Recovery Procedure
13 - Reformat and restore file system
[Boot Menu] 5
The following image is in the Flash File System:
File Name......................................image1
CRC............................................0x393d (14653)
Target Device..................................0x10508548
Size...........................................0xbbf768 (12318568)
Number of Components...........................4
Operational Code Size..........................0xa1524c (10572364)
Operational Code Offset........................0x144d48 (1330504)
Operational Code FLASH flag....................1
Operational Code CRC...........................0x2112
Operational Compression flag...................2 (lzma)
Boot Code Version..............................1
Boot Code Size.................................0x100000 (1048576)
Boot Code Offset...............................0x44d48 (281928)
Boot Code FLASH flag...........................0
Boot Code CRC..................................0xCF8C
VPD - rel 5 ver 1 maint_lvl 11 build_num 1
Timestamp - Fri Apr 28 09:17:02 2017
File - PC8024v5.1.11.1.opr
[Boot Menu]