DELL EMC SAMSUNG SSD SATA 520b what can I do with these?

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

cTurtle98

New Member
Apr 28, 2021
1
0
1
DELL EMC pn005049298
drive says model mz3s9200xacp-000c3
it has a board that appears to be a fibre channel transposer part 250-136-903c
the label on the drive says sata

this is what I get in dmesg when it comes on
[ 2388.037328] scsi 5:0:0:0: Direct-Access ATA SS160512 TC3Q PQ: 0 ANSI: 5
[ 2388.048489] sd 5:0:0:0: [sda] Unsupported sector size 520.
[ 2388.048497] sd 5:0:0:0: [sda] 0 512-byte logical blocks: (0 B/0 B)
[ 2388.048501] sd 5:0:0:0: [sda] 520-byte physical blocks
[ 2388.048679] sd 5:0:0:0: [sda] Write Protect is off
[ 2388.048685] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2388.048696] sd 5:0:0:0: Attached scsi generic sg0 type 0
[ 2388.048717] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2388.049153] sd 5:0:0:0: [sda] Unsupported sector size 520.
[ 2388.049455] sd 5:0:0:0: [sda] Attached SCSI disk

I tried to format it with sg_format but it failed to format
# sg_format --format --size=512 /dev/sg0 -v
inquiry cdb: 12 00 00 00 24 00
ATA SS160512 TC3Q peripheral_type: disk [0x0]
PROTECT=0
mode sense (10) cdb: 5a 00 01 00 00 00 00 00 fc 00
Mode Sense (block descriptor) data, prior to changes:
Number of blocks=0 [0x0]
Block size=512 [0x200]

A FORMAT will commence in 10 seconds
ALL data on /dev/sg0 will be DESTROYED
Press control-C to abort
A FORMAT will commence in 5 seconds
ALL data on /dev/sg0 will be DESTROYED
Press control-C to abort
format cdb: 04 18 00 00 00 00
format unit: Fixed format, current; Sense key: Illegal Request
Additional sense: Invalid field in cdb
Format command, illegal parameter
FORMAT failed

I have two of these.
can I do anything with them?
i dont have anything with the same connector as on the board that converts from sata